My Bespoke Wiring Loom....electrical pornography

[Zmaster2k]

For those that havent read my build thread...

im having a bespoke wiring loom made for me by the lads at Beaniesport

https://www.facebook.com/Beaniesport

If your a facebook user please give these guys a "like"

Anyway they have been working from the back of the car to the front then the intrior is tackled.. im using a race technology dash 2 and omex standalone management... no radio etc

Heres the Fuel pump connector


Heres a joint


Tail light Connector


Handbrake light


Taillight Connector and Fuel pump ground


The Completed Rear Loom


let the soldering begin!



Universal omex loom stripped an harvested for parts



Wires


passenger side indicator


Drivers side indicator


headlight Loom








Coilpack and Water Temp Connectors


Speed Sensor, Lambda and Oil Pressure


Beginings of Fuse Box


neptune bulkhead connectors



completed injectors and air temp


Engine loom fitted


Interior loom nearing completion!



new fusebox taking shape!



Will update when done!

[rix]

Beautiful, lol. Hope you didn't forget the number plate illumination (etc!)

[Zmaster2k]

LOL thats part of the rear light loom.

[Herman Toothrot]

Looks good and nice knowing there is no additional rubbish you don't need. Only one thing though, solder, I once went on a motec course and they expressly said solder should never be used, joints should be crimped.

[Krikkit]

Herman Toothrot said:

Looks good and nice knowing there is no additional rubbish you don't need. Only one thing though, solder, I once went on a motec course and they expressly said solder should never be used, joints should be crimped.

A never-ending argument! I prefer crimped over solder, as long as the right tools are available to do it.

Not hard to build your own loom though - all you need is time and the right connectors etc. All that braid and heatshrink is the easiest bit!

[C.A.R.]

The replacement section of loom I made for my mates Polo refers light switch definitely looked as neat as that...and definitely did not include lots of electrical tape...

[Beyond Rational]

Working on the floor? At least you know it's grounded.

[Meoricin]

C.A.R. said:

The replacement section of loom I made for my mates Polo refers light switch definitely looked as neat as that...and definitely did not include lots of electrical tape...

Not seeing any electrical tape in the pics - though I agree that as far as wiring goes, it looks pretty pedestrian.