Is the front wing on a Civic SE the same as a Type R?
Is the front wing on a Civic SE the same as a Type R?
Author
Discussion

zed4

Original Poster:

7,248 posts

251 months

Tuesday 28th January 2014
quotequote all
Hi,

Unfortunately this evening my girlfriend whacked the neighbours car with her Civic. It's a very tight shared driveway and they had parked their people carrier in a really awkward place. We have to reverse in to the drive and as my girlfriend swing the front of car around it caught the back of the neighbour's car. Very lightly scraped the neighbour's car, but put a big dent in the side of the girlfriend's Civic frown just caught it in the wrong place!

As the dent is on the wheel arch I think it will be quite difficult to get out and it will definitely need painting as it's creased and some paint has flaked off, so I think it's best to just try and find a salvageable wing somewhere.

I've found a wing from a Civic Type R at Silverlake and I was wondering if it was the same as the wing on the SE. Anyone knew? I'd really appreciate a definitive answer ASAP as I will go and get it tomorrow.

Cheers,

Dan

Backtobasics

1,182 posts

212 months

Tuesday 28th January 2014
quotequote all
Did the breaker say it would fit?

zed4

Original Poster:

7,248 posts

251 months

Tuesday 28th January 2014
quotequote all
Backtobasics said:
Did the breaker say it would fit?
He didn't know.

ecsrobin

18,664 posts

194 months

Tuesday 28th January 2014
quotequote all
Yes it will fit and this is how you do it:

http://www.civinfo.com/forum/how/70495-how-5-door-...

zed4

Original Poster:

7,248 posts

251 months

Tuesday 28th January 2014
quotequote all
Oops, sorry, I should say it's a 2004 (53 plate) mk 7. It's the 1.6 SE. Also, I'd like to ensure the panels are the same, as I will only be changing on side. I don't want to know if a Type R panel will fit, only to find it's different to the other side!

ecsrobin

18,664 posts

194 months

Tuesday 28th January 2014
quotequote all
I read wing as bumper frown but judging by that guide it would fit on a FN shape. I wouldn't see why it wouldn't fit certainly on the FN shape the only changes were mechanical with different bumpers. I know its a small risk to take but it could keep you occupied for a few hours.

Tc24

533 posts

168 months

Tuesday 28th January 2014
quotequote all
Pretty sure it will. The Sport/Type R kit is pretty much the same as the SE, just with some extra skirty bits on the bumpers.

zed4

Original Poster:

7,248 posts

251 months

Tuesday 28th January 2014
quotequote all
FYI, this is the (previously mint) car


Paintwork in very good condition by danyeates, on Flickr

zed4

Original Poster:

7,248 posts

251 months

Tuesday 28th January 2014
quotequote all
It certainly looks the same...


Tc24

533 posts

168 months

Tuesday 28th January 2014
quotequote all
zed4 said:
FYI, this is the (previously mint) car


Paintwork in very good condition by danyeates, on Flickr
Didn't sell in the end then smile? Seem to remember posting in your thread when you were considering moving it on.

Layacable

820 posts

237 months

Tuesday 28th January 2014
quotequote all
Remember that the facelift wing does not have the side repeaters within it, they are housed in the wing mirror.

zed4

Original Poster:

7,248 posts

251 months

Tuesday 28th January 2014
quotequote all
Layacable said:
Remember that the facelift wing does not have the side repeaters within it, they are housed in the wing mirror.
Oh right , good point, I think ours is a semi facelift. It has the newer lights, but older side repeaters.

zed4

Original Poster:

7,248 posts

251 months

Tuesday 28th January 2014
quotequote all
Tc24 said:
zed4 said:
FYI, this is the (previously mint) car


Paintwork in very good condition by danyeates, on Flickr
Didn't sell in the end then smile? Seem to remember posting in your thread when you were considering moving it on.
We do still want to sell it, we were going to wait until spring, get Christmas out of the way! Thinking of getting the new shape Fabia VRS actually.

zed4

Original Poster:

7,248 posts

251 months

Tuesday 28th January 2014
quotequote all
I've found new panels quite cheap, what would it cost to paint a new panel, roughly?

zed4

Original Poster:

7,248 posts

251 months

Wednesday 29th January 2014
quotequote all
Layacable said:
Remember that the facelift wing does not have the side repeaters within it, they are housed in the wing mirror.
This advice proved invaluable!

Turns out the one Silverlake had was from a 2002 car, BUT the previous owner had facelifted the car to 2004 onwards spec! So it didn't have the side repeater holes. That saved a long wasted journey.

I've bought one from eBay now, £45 delivered, very good condition in black, with side repeater holes. Fantastic. I just hope it doesn't arrive damaged!

Layacable

820 posts

237 months

Wednesday 29th January 2014
quotequote all
zed4 said:
Layacable said:
Remember that the facelift wing does not have the side repeaters within it, they are housed in the wing mirror.
This advice proved invaluable!

Turns out the one Silverlake had was from a 2002 car, BUT the previous owner had facelifted the car to 2004 onwards spec! So it didn't have the side repeater holes. That saved a long wasted journey.

I've bought one from eBay now, £45 delivered, very good condition in black, with side repeater holes. Fantastic. I just hope it doesn't arrive damaged!
Great stuff!

zed4

Original Poster:

7,248 posts

251 months

Tuesday 25th February 2014
quotequote all
Taken a while, but got it fitted in the end. The answer is yes, the Type R wing is exactly the same as the SE wing! You'd never notice I've changed the wing now. smile