brake pad disintegrated off metal backing
brake pad disintegrated off metal backing
Author
Discussion

pimping

Original Poster:

759 posts

203 months

Wednesday 9th April 2014
quotequote all
I braked and then found one if my brakes binding. Thankfully I was only 50 ft from home. Upon closer inspection and taking the caliper off it appears the braking material of the brake pad had come off entirely and clumped into one mass jamming on the brakes. Is this normal?

MG CHRIS

9,322 posts

196 months

Thursday 10th April 2014
quotequote all
No but it can and does happen various causes of it, cheap pads are one or a binding brake can cause the pad to heat up and the pad to separate from the backing.

GC8

19,910 posts

219 months

Thursday 10th April 2014
quotequote all
EBC?

BritishRacinGrin

26,497 posts

189 months

Thursday 10th April 2014
quotequote all
I've seen this on a rear caliper when the car had been driven with the handbrake on. The massive heat must've loosened the bond.

Eighteeteewhy

7,259 posts

197 months

Thursday 10th April 2014
quotequote all
GC8 said:
EBC?
It's as easy as 1 2 3

Bibbs

3,754 posts

239 months

Thursday 10th April 2014
quotequote all
GC8 said:
EBC?
Euro Car Parts?

BOBTEE

1,034 posts

193 months

Thursday 10th April 2014
quotequote all
Bibbs said:
GC8 said:
EBC?
Euro Car Parts?
No,



Bibbs

3,754 posts

239 months

Thursday 10th April 2014
quotequote all
BOBTEE said:
No,

I know what EBC are, I also know what stuff used to occasionally come for ECP.

anonymous-user

83 months

Thursday 10th April 2014
quotequote all
Had this recently on my MX5. EBC Yellowstuff pads.

Ozzie Osmond

21,189 posts

275 months

Thursday 10th April 2014
quotequote all
Personally I like my safety critical parts to come from the main dealer. Why risk your life for twenty quid?

MG CHRIS

9,322 posts

196 months

Tuesday 15th April 2014
quotequote all
Ozzie Osmond said:
Personally I like my safety critical parts to come from the main dealer. Why risk your life for twenty quid?
Yes because the main dealers make there own brakes, um no they get them from brake manufactures same as all car parts stores but I would avoid getting stuff from ebay unless it's a reputable company.

BGarside

1,568 posts

166 months

Tuesday 15th April 2014
quotequote all
Have seen a few cases of this in Car Mechanics mag.

I can't believe the manufacturers can get away with a safety-critical item like this breaking up. How come no-one's taking these to Trading Standards or the HSE??

Whe the friction material was both riveted and bonded to the backing plates I guess this would not be possible, though perhaps I'm thinking of drum brake shoes rather than disc pads??

Snowboy

8,028 posts

180 months

Tuesday 15th April 2014
quotequote all
Whenever I read about something like this my first thought is that it's probably a fake item.

There are a lot of established companies finding that fakes are getting into the supply chains at wholesalers and importers.
So they are being bought and sold in good faith as real ones.