peugeot 600 engine swap 1.9 for 2.0 will it fit ??

[THElildave]

hi I popped my engine today the cam pully shattered !! I was wondering if anyone has done a engine swap on a partner 600 ?? I have found a 2.0 ltr engine but mine is currently a 1.9 ltr .... is there any difference in mounts and such as I am considering putting the 2.0 ltr in mine in the place of the 1.9 but am not 100% sure if it'll go in, if anyone could advise me as to if it will go or not and how much of a job it'll be I would really appreciate it . many thanks in advance craig p {edit} the 1.9 engine is the DW8 and the 2.0 ltr is the DW10 engine ..... if that helps anyone

[e39darren]

The dw8 is an old style diesel which doesn't need much wiring where as the dw10 is the hdi engine which is newer common rail technology which needs lots of wiring so even if it physically fitted you would need to change all the wiring looms over and pretty much everything else including the fuel pump in the tank.
Its probably cheaper and easier to buy a new vehicle

[THElildave]

e39darren said:

The dw8 is an old style diesel which doesn't need much wiring where as the dw10 is the hdi engine which is newer common rail technology which needs lots of wiring so even if it physically fitted you would need to change all the wiring looms over and pretty much everything else including the fuel pump in the tank.
Its probably cheaper and easier to buy a new vehicle

thanks for that m8 will just ave to either find a DW8 lump or bite the bullet