Lowering springs
Discussion
Jesus what's with the eye rolls and mocking? Is this pistonheads or f
king dad's net?
OP, if you want to lower more than 30-40mm on most cars you will need aftermarket dampers to cope. You could even have custom dampers made to your specs.
Check the owners forum for your car maybe for the best advice on how to go forward.
That said, coilovers are a good package if you don't mind maintaining them. What ones do you have at the moment?
Ignore the s
tty comments from above. They'd all be w
king themselves silly if you had an M5 or something equally DADish.
king dad's net? OP, if you want to lower more than 30-40mm on most cars you will need aftermarket dampers to cope. You could even have custom dampers made to your specs.
Check the owners forum for your car maybe for the best advice on how to go forward.
That said, coilovers are a good package if you don't mind maintaining them. What ones do you have at the moment?
Ignore the s
tty comments from above. They'd all be w
king themselves silly if you had an M5 or something equally DADish.danjama said:
Jesus what's with the eye rolls and mocking? Is this pistonheads or f
king dad's net?
OP, if you want to lower more than 30-40mm on most cars you will need aftermarket dampers to cope. You could even have custom dampers made to your specs.
Check the owners forum for your car maybe for the best advice on how to go forward.
That said, coilovers are a good package if you don't mind maintaining them. What ones do you have at the moment?
Ignore the s
tty comments from above. They'd all be w
king themselves silly if you had an M5 or something equally DADish.
Have a look at his previous posts then I'll let you decide if your sensible response was worth the effort....
king dad's net? OP, if you want to lower more than 30-40mm on most cars you will need aftermarket dampers to cope. You could even have custom dampers made to your specs.
Check the owners forum for your car maybe for the best advice on how to go forward.
That said, coilovers are a good package if you don't mind maintaining them. What ones do you have at the moment?
Ignore the s
tty comments from above. They'd all be w
king themselves silly if you had an M5 or something equally DADish.We all have to start somewhere chaps. I remember my first attempts, I'm not proud looking back but at the time I thought I was the mutz nutz brah!
You learn by your mistakes, let the lad learn like the rest of us did!
Answering op's question, it's a very broad question. There are hundreds of springs out there ranging from a light drop right down to your full blown pan scraping, ride quality killing, scene points springs. Personally I would go to a company such as koni, who in my opinion make fairly comfy springs and spend a bit on development. Go with what they recommend as it'll be what they regard as optimum, if you go too low you run into all sorts of camber issues etc.
You learn by your mistakes, let the lad learn like the rest of us did!
Answering op's question, it's a very broad question. There are hundreds of springs out there ranging from a light drop right down to your full blown pan scraping, ride quality killing, scene points springs. Personally I would go to a company such as koni, who in my opinion make fairly comfy springs and spend a bit on development. Go with what they recommend as it'll be what they regard as optimum, if you go too low you run into all sorts of camber issues etc.
Elliottbest said:
I have a set of coilovers on my polo at the moment but they need replacing soon and i want to get lowering springs imstead of coilovers. Has anyone lowered there car and can show me how low it is and what mm springs you got?
Polo's came with coilovers std (they just weren't adjustable coilovers)Coilover = "Coil over Damper"
If your car aftermarket coilovers that are wound down to the floor then the adjusters are probably a stuck fast
Fronts OE in the middle - Aftermarket coilovers on the outside

Rears

At the bottom of the travel

It rode rubbish like that - pretty much on the bump stops
Raised it to a sensible ride height and it was fine for cheap aftermarket stuff

Just wondering how many people go to the trouble of resetting the load apportioning valve for the rear brakes when lowering. The valve uses ride height as a proxy for weight over the back axle of the car so that the lower the car the more the brake bias is moved to the rear. Dropping the car using shortened springs or adjustable platforms will cause the rear brakes to lock up prematurely. ABS on modern cars will mask the effect but I've seen many a lowered hatch spun out off the road where the driver said the rear went under braking.
Used to be that lowering kits for VAG cars came with a retensioned spring to connect the valve to the rear torsion beam to compensate, and on Fords and VX's you could adjust the valve by repositioning the sliding bolt connecting the valve actuator.
Does no one bother with this anymore?
Used to be that lowering kits for VAG cars came with a retensioned spring to connect the valve to the rear torsion beam to compensate, and on Fords and VX's you could adjust the valve by repositioning the sliding bolt connecting the valve actuator.
Does no one bother with this anymore?
Gassing Station | General Gassing | Top of Page | What's New | My Stuff




