Different tyre tread depths on same axle ok? Audi say yes.
Discussion
Hi guys,
I'm just in the process of buying an A1 from Audi. It's gone for its inspection and it's caoe back saying that one of the tyres is on 3mm so they're going to replace it with a new tyre. I'm going to check with them that they're replacing it with the same brand and model as the tyre on the other end of the axle, but is there any case to be made for them changing the other tyre on the same axle tyre as well? The other tyre is at 4mm, so there'll be one tyre of 8mm and another of 4mm on the same axle. Could this not cause potential stability problems as the level of grip is different across the axle. Say for example that I went through some standing water, or the roads are really wet, the new tyre should dispel the water more effectively than the old (which is more likely to aquaplane) which could cause the car to become unstable. Audi say not and they will only replace one tyre. Am I wrong to ask for both tyres on the same axle to be replaced? Grateful for your views on this guys.
Cheers
I'm just in the process of buying an A1 from Audi. It's gone for its inspection and it's caoe back saying that one of the tyres is on 3mm so they're going to replace it with a new tyre. I'm going to check with them that they're replacing it with the same brand and model as the tyre on the other end of the axle, but is there any case to be made for them changing the other tyre on the same axle tyre as well? The other tyre is at 4mm, so there'll be one tyre of 8mm and another of 4mm on the same axle. Could this not cause potential stability problems as the level of grip is different across the axle. Say for example that I went through some standing water, or the roads are really wet, the new tyre should dispel the water more effectively than the old (which is more likely to aquaplane) which could cause the car to become unstable. Audi say not and they will only replace one tyre. Am I wrong to ask for both tyres on the same axle to be replaced? Grateful for your views on this guys.
Cheers
There is certainly no obligation to replace it, but then there's no obligation to replace the 3mm one either. It'll just come down to what they're own policies are.
Personally, I'd be a bit wary of any car where the tyres on the same axle have worn at significantly different rates. It could just indicate the previous owner had a lot of roundabouts on his commute or it could be an indication of a suspension issue of some kind.
Personally, I'd be a bit wary of any car where the tyres on the same axle have worn at significantly different rates. It could just indicate the previous owner had a lot of roundabouts on his commute or it could be an indication of a suspension issue of some kind.
Yes its fine, the only thing that shouldn't be on the same axle is different types of tyre ie radial and cross ply and since all (most) tyres are radial these days it really doesn't matter.
Im not saying that having matching tread/tyre brand isn't a nice thing to have but its not dangerous to have 4 different brand tyres with different tread depths on the 4 corners.
Plus your buying an A1 its not a sports car, its just a every day hatch, unless your getting an a45 or something.
Im not saying that having matching tread/tyre brand isn't a nice thing to have but its not dangerous to have 4 different brand tyres with different tread depths on the 4 corners.
Plus your buying an A1 its not a sports car, its just a every day hatch, unless your getting an a45 or something.
kambites said:
There is certainly no obligation to replace it, but then there's no obligation to replace the 3mm one either. It'll just come down to what they're own policies are.
Personally, I'd be a bit wary of any car where the tyres on the same axle have worn at significantly different rates. It could just indicate the previous owner had a lot of roundabouts on his commute or it could be an indication of a suspension issue of some kind.
Or it had a puncture that wasn't repairable. Personally, I'd be a bit wary of any car where the tyres on the same axle have worn at significantly different rates. It could just indicate the previous owner had a lot of roundabouts on his commute or it could be an indication of a suspension issue of some kind.

I'd prefer to have matching tyres, I'd pay for one myself to match up, especially when buying a car as it'll only cause more aggro down the line

Thanks for the quick replies guys. My fiancee and I are downsizing to one car so we needed something we'll both be mildly happy with so we agreed on the A1 sportback 182bhp s-tronic. It won't set the world alight but it's fairly nippy.
I won't push Audi on the tyres then. I don't think the current treads are wildly out of sync, one's at 3mm and the other at 4mm. Audi have just decided to replace the 3mm one.... which I suppose is the least they can do given the premium they charge for their used approved stock
I'm just normally used to replacing tyres in pairs as the tread depths are normally roughly the same.
I won't push Audi on the tyres then. I don't think the current treads are wildly out of sync, one's at 3mm and the other at 4mm. Audi have just decided to replace the 3mm one.... which I suppose is the least they can do given the premium they charge for their used approved stock
I'm just normally used to replacing tyres in pairs as the tread depths are normally roughly the same.Sounds like a pain in the bottom chasing tyre wear in the future though - e.g. remaining 4mm tyre wears requiring replacement and your new tyre is now also worn so you wont ever have 'even' tyres.
Maybe see if they can do a deal where you contribute to getting the other tyre replaced at the same time?
Maybe see if they can do a deal where you contribute to getting the other tyre replaced at the same time?
Foliage said:
Yes its fine, the only thing that shouldn't be on the same axle is different types of tyre ie radial and cross ply and since all (most) tyres are radial these days it really doesn't matter.
By the above you imply its perfectly safe to have two different sizes on the same axle, as the only thing that matters is tyre construction type??!! By your mark I could have a 15" and 17" wheel on the same axle. I'm pretty sure that's why space savers are speed restricted.
It's an mot failure to have two tyres of different sizes on the same axle.
Gassing Station | General Gassing | Top of Page | What's New | My Stuff


