which tyre pressure gauge?
which tyre pressure gauge?
Author
Discussion

jamesj197

Original Poster:

83 posts

142 months

Wednesday 1st April 2015
quotequote all
I'm looking to buy a tyre pressure gauge, what do you recommend?

Crusoe

4,126 posts

262 months

Wednesday 1st April 2015
quotequote all
halfords one that lets you deflate to a desired value is quite good.

http://www.halfords.com/motoring-travel/tools-diy/...

telecat

8,528 posts

272 months

Wednesday 1st April 2015
quotequote all
I bought this one. It is pretty good

http://www.halfords.com/motoring-travel/tools-diy/...

trickywoo

14,283 posts

261 months

Wednesday 1st April 2015
quotequote all
I favour the pen style ones. Accurate, simple, reliable.

jamesj197

Original Poster:

83 posts

142 months

Wednesday 1st April 2015
quotequote all
Crusoe said:
halfords one that lets you deflate to a desired value is quite good.

http://www.halfords.com/motoring-travel/tools-diy/...
Thanks, I'm looking for something around £10 really.

Tyre Tread

10,697 posts

247 months

Wednesday 1st April 2015
quotequote all
I bought this one but not from Halfrauds: http://www.halfords.com/motoring-travel/tools-diy/...

Available cheaper elsewhere but still over your £10 budget.

I loaned it to my brother to use when he was visiting - he said he was so impressed he bought one.
ETA: the built in LED light that comes on when you press any of the buttons is useful.

jamesj197

Original Poster:

83 posts

142 months

Wednesday 1st April 2015
quotequote all
Are the pen style ones more accurate than the digital ones?

jamesj197

Original Poster:

83 posts

142 months

Wednesday 1st April 2015
quotequote all

8bit

5,589 posts

186 months

Wednesday 1st April 2015
quotequote all
telecat said:
I bought this one. It is pretty good

http://www.halfords.com/motoring-travel/tools-diy/...
I've got that one. I also have a Halfords tyre pump/compressor thing. Usually - but not always - they give different readings (1.5 to 2psi difference) so I've no idea which one to trust. I suspect the pump will be more accurate than this gauge will.

telecat

8,528 posts

272 months

Wednesday 1st April 2015
quotequote all
8bit said:
telecat said:
I bought this one. It is pretty good

http://www.halfords.com/motoring-travel/tools-diy/...
I've got that one. I also have a Halfords tyre pump/compressor thing. Usually - but not always - they give different readings (1.5 to 2psi difference) so I've no idea which one to trust. I suspect the pump will be more accurate than this gauge will.
I'd go with the Gauge. I bought it because it came top in this test.

http://www.autoexpress.co.uk/accessories-tyres/854...

anonymous-user

85 months

Wednesday 1st April 2015
quotequote all
jamesj197 said:
Are the pen style ones more accurate than the digital ones?
In my experience yes.
I've tried a number of pen style ones that all gave the same readings.
The more expensive inflator types with a built in gauge can lose their calibration especially with misuse

Riktoid

231 posts

143 months

Wednesday 1st April 2015
quotequote all
The one on the end of my leg. Had it for years.

jimmy156

3,836 posts

218 months

Wednesday 1st April 2015
quotequote all
Are we at the stage where we need to ask for buying advice for a £10 tyre gauge?

Surely all £10 tyre gauges are as good as each other!

vikingaero

13,584 posts

200 months

Wednesday 1st April 2015
quotequote all
Get an analogue one. Guaranteed when you need to use it in a years time the batteries will be flat...

Sump

5,512 posts

198 months

Wednesday 1st April 2015
quotequote all
vikingaero said:
Get an analogue one. Guaranteed when you need to use it in a years time the batteries will be flat...
Jesus, it's a 2 second job to replace them. Keep some spare on hand?

On a side note my 3 year old one is still on it's original battery.

jamesj197

Original Poster:

83 posts

142 months

Wednesday 1st April 2015
quotequote all

Toltec

7,179 posts

254 months

Wednesday 1st April 2015
quotequote all
The old fashioned pencil gauges can be surprisingly accurate, I have a pcl one which was within half a psi at five points up to 50psi.

The main thing is repeatability rather than outright accuracy. Always set the pressure using the same gauge* so that once you have trimmed it to your liking you can know the same readout gets you the pressure you want.

* You can use another gauge just calibrate it against your main one.