Reccomend a HID kit please
Discussion
After a HID kit for my Freelander 2. They will be fitted to the high beam only and please, I already understand the legalities.
So just a recommendation. Are any of the ebay ones any good?
I also see you can get 35w and 55w, any reason not to go 55w?
I think I will need ones the go with CAN Bus systems, can anyone confirm this please.
There seems to conflicting opinion as to what colour temp to get, some say 4300K and others 6000K. I am after the brightest not the blingest
So just a recommendation. Are any of the ebay ones any good?
I also see you can get 35w and 55w, any reason not to go 55w?
I think I will need ones the go with CAN Bus systems, can anyone confirm this please.
There seems to conflicting opinion as to what colour temp to get, some say 4300K and others 6000K. I am after the brightest not the blingest

Edited by Petrolhead on Thursday 2nd April 11:28
Aren't LED headlights the future now?
HID's take a bit of time to warm up so aren't really suited to coming on and off, they are more suited to being turned on and staying on.
Good luck either way.
I'm sure you'll be shot down in flames though. This is PH after all .
HID's take a bit of time to warm up so aren't really suited to coming on and off, they are more suited to being turned on and staying on.
Good luck either way.
I'm sure you'll be shot down in flames though. This is PH after all .

Edited by A900ss on Thursday 2nd April 11:56
A900ss said:
Aren't LED headlights the future now?
HID's take a bit of time to warm up so aren't really suited to coming on and off, they are more suited to being turned on and staying on.
Good luck either way.
I'm sure you'll be shot down in flames though. This is PH after all .
LED headlights need a whole new headlight unit tho, not just a bulb. But I agree, that it wouldn't be ideal for a full-beam only light. Cars which use HID for both often have a shutter which opens to allow the full-beam light. I'm not aware of any aftermarket HIDs which can offer this, although I've not looked recently.HID's take a bit of time to warm up so aren't really suited to coming on and off, they are more suited to being turned on and staying on.
Good luck either way.
I'm sure you'll be shot down in flames though. This is PH after all .

Edited by A900ss on Thursday 2nd April 11:56
brightest will always be the lowest temp, so 4300k (as found in standard/oem Xenon headlights).
However..
Don't forget HID's need a second to 'heat' up. so by putting them in your main beams, flashing someone for example probably wont happen as the bulb wont have time to heat up. If your using it to increase night time visibility and have them on for along time then they.ll be good, 55w are definetly not road legal but neither is putting them in reflector headlamps without the washers and so on and so forth but for brightness sake they will be the brightest.
I ran HIDs in my old mk4 golf for years inside projector headlamps, light out put was cracking and close to factory Xenons as I could get, but I left the main beams as standard bulbs.
my HID kit was called Virtual Daylight, made by Ultra. also check out HIDs4U. ..Can bus free error hids are a load of toff too.
However..
Don't forget HID's need a second to 'heat' up. so by putting them in your main beams, flashing someone for example probably wont happen as the bulb wont have time to heat up. If your using it to increase night time visibility and have them on for along time then they.ll be good, 55w are definetly not road legal but neither is putting them in reflector headlamps without the washers and so on and so forth but for brightness sake they will be the brightest.
I ran HIDs in my old mk4 golf for years inside projector headlamps, light out put was cracking and close to factory Xenons as I could get, but I left the main beams as standard bulbs.
my HID kit was called Virtual Daylight, made by Ultra. also check out HIDs4U. ..Can bus free error hids are a load of toff too.
Edited by irfan1712 on Thursday 2nd April 12:14
feef said:
Cars which use HID for both often have a shutter which opens to allow the full-beam light. I'm not aware of any aftermarket HIDs which can offer this, although I've not looked recently.
Nope, that's Bi-Xenon. one bulb with a shutter on it which is down for dipped headlights but when the main beams are flashed or turned on the shutter opens.Standard Xenons are just that, a standard Xenon bulb but with a separate traditional main beam bulb next/near it as found in earlier cars with xenons.
You can also get HIDs in Bi-Xenon form too though

Place in Southampton, HIDS4U or something, do decent, vehicle specific kits, at sensible money given the quality. No running extra lives and earths to the battery, it uses the existing loom, and they know their stuff.
Just to add, got a set for my van recently, 55 watt bi - xenon. £115 for the kit, canbus friendly. 5000k will give the whitest light, sadly they didn't have them in stock, and I ended up with 6000k, thankfully not as blue as I thought when warmed up though.
Just to add, got a set for my van recently, 55 watt bi - xenon. £115 for the kit, canbus friendly. 5000k will give the whitest light, sadly they didn't have them in stock, and I ended up with 6000k, thankfully not as blue as I thought when warmed up though.
Edited by Heaveho on Thursday 2nd April 12:24
feef said:
LED headlights need a whole new headlight unit tho, not just a bulb.
Why would an LED need a complete unit but a HID be ok in the old unit. I'd have though they either both need a new unit or both would be ok. Not sure if suitable but gives you an idea
http://woodypeck.com/?product_cat=cree-led-bulbs
After replacing my sidelight and number plate bulbs with led's I came across H4 Led's! At the price I had to get a set just to satisfy my own curiosity and all suspicions were conformed when fitted! First the polarity was wrong and wouldnt come onto high beam, so some wire swapping was in order. Finally working, I waited till dark and tried them. Visually to look at they are extremely bright, however once in the car looking out, they are terrible! Dipped beam gives about the same appearance on the road as a good sidelight bulb and main beam lights up everything over a 180 degree field of view, including hedge's, tops of tree's and the road infront, albeit not very bright! Needless to say the old halogens have been refitted!
DaveyBoyWonder said:
LEDs - a tenner on eBay vs £1000+ (?) option on some new cars. One of them isn't going to work well is it?
Not even that!!http://www.ebay.co.uk/itm/Car-H4-120-LED-3528-SMD-...
feef said:
LED headlights need a whole new headlight unit tho, not just a bulb. But I agree, that it wouldn't be ideal for a full-beam only light. Cars which use HID for both often have a shutter which opens to allow the full-beam light. I'm not aware of any aftermarket HIDs which can offer this, although I've not looked recently.
You can put LED bulbs in 'normal' (i.e. H1/3/4 etc) headlights.The shutter situation you are describing is typically called bi-xenon and requires a new projector to be installed. There are lots of different kits which offer this functionality.
My Phaeton is one of the very few vehicles equipped from the factory with dual Xenon headlights, ie a separate bulb for each beam. It's not a good idea! First warm up from cold takes nearly ten seconds, so if you need your main beam in a hurry it just isn't there! Once they've warmed up fully, they reach full brightness in a second or two, provide they haven't been off too long.
As others have said, a headlight flash doesn't really work.
I wouldn't recommend separate HID bulbs for main beam.
As others have said, a headlight flash doesn't really work.
I wouldn't recommend separate HID bulbs for main beam.
Petrolhead said:
After a HID kit for my Freelander 2. They will be fitted to the high beam only and please, I already understand the legalities.
So just a recommendation. Are any of the ebay ones any good?
I also see you can get 35w and 55w, any reason not to go 55w?
I think I will need ones the go with CAN Bus systems, can anyone confirm this please.
There seems to conflicting opinion as to what colour temp to get, some say 4300K and others 6000K. I am after the brightest not the blingest
35w and 55w makes no real difference. As another has stated 4300k is the most sensible (human eyes 'see' more in 'colours' closest to daylight).So just a recommendation. Are any of the ebay ones any good?
I also see you can get 35w and 55w, any reason not to go 55w?
I think I will need ones the go with CAN Bus systems, can anyone confirm this please.
There seems to conflicting opinion as to what colour temp to get, some say 4300K and others 6000K. I am after the brightest not the blingest

Edited by Petrolhead on Thursday 2nd April 11:28
Having HID on high beam only isn't the best idea. They take some time to warm up and don't like being switched on and off a lot.
DaveyBoyWonder said:
LEDs - a tenner on eBay vs £1000+ (?) option on some new cars. One of them isn't going to work well is it?
I wasn't suggesting a £10 LED bulb from eBay. The link I gave was to a LED kit that is about the same price as a HID kit. £100 tomtom vs £1500 factory sat nav?

Petrolhead said:
So are you guys suggesting I would be better off just change the dip beam only
They are suggesting dont do it all. Yes you understand the illegalities but they are illegal for a reason. They are a menace. The people that sell them say they are vehicle specific but they would say that wouldn't they - more sales ££££.
Ive had them before in a few cars:
1/ Had a HIDS4U kit in a Nissan X-trail - fantastic light output but fed up of people flashing me - the light scatter was horrendous but I was younger and thought sod it - plus the legalities of them wasn't quite as clear cut.
2/ Moved same kit into a Nissan Navarra - even worse light scatter. Took them out and binned them after a week
3/ Different kit into an Octavia vRS - projector headlights. Much sharper, in fact perfect light cut off but the light seemed to be focused in a different place and seemed to draw my eyes away from where you would normally look - took them out after a month or so
4/ Same kit into a Citroen C-Crosser - Same again, the main part of the illumination was too close to the car and focused my view wrong. Binned
Having done some reading on them I saw an article from someone who claims to of designed headlights. What he said made sense. Basically, reflector and projector type headlights are designed around the main source of light (the filament on a halogen bulb) been in the exact same place on any make of bulb of that type. The lenses are designed to point that light on particular places on the road. Get a mirror and shine a light in it. You get a reflection from the mirror. Move the light and the reflection on the wall moves. Same when you put a HID bulb in, the main source of the light is in a different place as to what the reflector expects it to be in. Headlights are not just one mirror though - there are many all now pointing the light at the wrong place.
I know have two cars that have Bi-Xenons as standard (and both are adaptive too) and there is a huge difference in the quality of light from these than the aftermarket kits.
You pays your money.....
Gassing Station | General Gassing | Top of Page | What's New | My Stuff


