sorting this scuff/scratch out
Discussion
hi everyone, I have a fairly large scratch and scuff on my front bumper - the car is a 2003 rover 75 connoisseur and I think the bumper is plastic??
I have started with t-cut and a light rubbing compound, but would've said the scratches/grazes will need sanding down and repainting?
what's the best method - a high grit sandpaper to lightly remove the rough edges and scratches, and paint etc will it need fillering at all, as I certainly don't think much more will polish out?
Thanks all




I have started with t-cut and a light rubbing compound, but would've said the scratches/grazes will need sanding down and repainting?
what's the best method - a high grit sandpaper to lightly remove the rough edges and scratches, and paint etc will it need fillering at all, as I certainly don't think much more will polish out?
Thanks all
Gubba, this is a good ghetto way to improve it. You'll need a microfibre 'suede' style cloth, touch-up paint and some lighter fluid.
I've followed the guy's method and got excellent results, improved further by keying the surface lightly pre-paint with 3000 grit wet & dry.
Best of luck.
http://www.detailingworld.co.uk/forum/showthread.p...
I've followed the guy's method and got excellent results, improved further by keying the surface lightly pre-paint with 3000 grit wet & dry.
Best of luck.
http://www.detailingworld.co.uk/forum/showthread.p...
Gassing Station | General Gassing | Top of Page | What's New | My Stuff


