Steering column has loads of movement/play? MOT fail?!
Discussion
Having an issue with my steering column. MK3 Fiesta with power steering. With the lock on, the whole shroud and switchgear moves with the wheel if I try and turn the wheel. Also, if I pull on the wheel, I can pull the column towards me, it's done this since I bought it. Checked the UJ by the pedals and it seems to be fine, there's no play between the rack and the column, but the column moves way more than it should. My other Fiesta never did this, anyone seen this before and know how to fix it? Checked both securing pins and they are solid, don't know what else to do!
http://vid938.photobucket.com/albums/ad226/JoeyBoy...
http://vid938.photobucket.com/albums/ad226/JoeyBoy...
Definitely a fail.
http://www.motinfo.gov.uk/htdocs/m4s02000101.htm
http://www.motinfo.gov.uk/htdocs/m4s02000102.htm
Something's clearly failed or come apart at the upper end of the column, and you're just going to have to get in there and find out what.
http://www.motinfo.gov.uk/htdocs/m4s02000101.htm
http://www.motinfo.gov.uk/htdocs/m4s02000102.htm
Something's clearly failed or come apart at the upper end of the column, and you're just going to have to get in there and find out what.
Looks like one or more of the four steering column bushes has failed;
http://passionford.com/forum/ford-escort-rs-turbo/...
http://passionford.com/forum/ford-escort-rs-turbo/...
rfsteel said:
Looks like one or more of the four steering column bushes has failed;
http://passionford.com/forum/ford-escort-rs-turbo/...
Worn bushes would not cause the switchgear and shrouds to move when the wheel is turned. I suspect the column may not be bolted correctly to the metal structure behind the dashboard.http://passionford.com/forum/ford-escort-rs-turbo/...
Mr2Mike said:
rfsteel said:
Looks like one or more of the four steering column bushes has failed;
http://passionford.com/forum/ford-escort-rs-turbo/...
Worn bushes would not cause the switchgear and shrouds to move when the wheel is turned. I suspect the column may not be bolted correctly to the metal structure behind the dashboard.http://passionford.com/forum/ford-escort-rs-turbo/...
996TT02 said:
Definitely this, and unless metal has cracked, it's probably an easy fix involving tightening or fitting (if they fell out) bolts.
From the looks of things the column is held in place with two pins to the metal. These are both tight, and these are the only bolts I can see, with the column pulled all the way out, the side to side movement disappears which indicates this is the position it's meant to sit in. I think it's possible that a bush or spring has failed which allows the column to retract and gives me all the side to side movement?ProjectZS said:
From the looks of things the column is held in place with two pins to the metal. These are both tight, and these are the only bolts I can see, with the column pulled all the way out, the side to side movement disappears which indicates this is the position it's meant to sit in. I think it's possible that a bush or spring has failed which allows the column to retract and gives me all the side to side movement?
A failed bush would allow the inner column (the bit which the steering wheel is attached to) to move around, but the switchgear is attached to the outer part of the column. It's possible you have both a worn/missing bush and the switchgear is not correctly attached to the outer column.Mr2Mike said:
A failed bush would allow the inner column (the bit which the steering wheel is attached to) to move around, but the switchgear is attached to the outer part of the column. It's possible you have both a worn/missing bush and the switchgear is not correctly attached to the outer column.
Yeah, I'm really stumped by it, but I think it has to do with the bush or spring not holding the column where it's supposed to be, as I said if I pull the column to it's most extended point, the movement is goneGassing Station | General Gassing | Top of Page | What's New | My Stuff


