Weird size bolts needed...Any ideas ?
Weird size bolts needed...Any ideas ?
Author
Discussion

Getragdogleg

Original Poster:

10,328 posts

214 months

Tuesday 14th April 2015
quotequote all
I need 4 odd sized bolts for a steering linkage.

Socket/Allen key style of head.
M8 thread, preferably fine, and matching nylock nuts.
20mm shoulder.
At least 50mm of thread after the shoulder.

Shoulder diameter of 11mm preferred but I can always sleeve the shoulder if I cant get the diameter I need.

These need to be a decent grade because they are to hold a pair of steering UJs on to the rubber Giubo.

I seem to be able to find plenty of shoulder bolts but the threaded section is always too short.

Does anyone know of any specialist fastener companies that stock oddities ?


Captain Muppet

8,540 posts

296 months

Tuesday 14th April 2015
quotequote all
I used to get custom fasteners made all the time by a fastener company in Yarmouth when I was doing offshore stuff 15 years ago. Try calling local places and asking. You could make your bolts out of some standard M12x70 cap head screws.

Rubin215

4,201 posts

187 months

Tuesday 14th April 2015
quotequote all
Try your local precision engineer; if they don't have it they can probably make it for you.

My local guy (CS Winter) has fabricated some amazing stuff for me over the years and only seems to charge three buttons an hour for his time.

I think he enjoys the challenge more than anything...

Getragdogleg

Original Poster:

10,328 posts

214 months

Tuesday 14th April 2015
quotequote all
Captain Muppet said:
Getragdogleg said:
I need 4 odd sized bolts for a steering linkage.

Socket/Allen key style of head.
M8 thread, preferably fine, and matching nylock nuts.
20mm shoulder.
At least 50mm of thread after the shoulder.

Shoulder diameter of 11mm preferred but I can always sleeve the shoulder if I cant get the diameter I need.

These need to be a decent grade because they are to hold a pair of steering UJs on to the rubber Giubo.

I seem to be able to find plenty of shoulder bolts but the threaded section is always too short.

Does anyone know of any specialist fastener companies that stock oddities ?
I used to get custom fasteners made all the time by a fastener company in Yarmouth when I was doing offshore stuff 15 years ago. Try calling local places and asking. You could make your bolts out of some standard M12x70 cap head screws.
I thought about making them but they need to be strong and I don't know enough about machining high tensile bolts to be confidant I wont bugger it up. At least if I buy something over spec that fits I know it wont break and leave me with no steering !

Leptons

5,493 posts

207 months

Tuesday 14th April 2015
quotequote all

Captain Muppet

8,540 posts

296 months

Tuesday 14th April 2015
quotequote all
Getragdogleg said:
Captain Muppet said:
Getragdogleg said:
I need 4 odd sized bolts for a steering linkage.

Socket/Allen key style of head.
M8 thread, preferably fine, and matching nylock nuts.
20mm shoulder.
At least 50mm of thread after the shoulder.

Shoulder diameter of 11mm preferred but I can always sleeve the shoulder if I cant get the diameter I need.

These need to be a decent grade because they are to hold a pair of steering UJs on to the rubber Giubo.

I seem to be able to find plenty of shoulder bolts but the threaded section is always too short.

Does anyone know of any specialist fastener companies that stock oddities ?
I used to get custom fasteners made all the time by a fastener company in Yarmouth when I was doing offshore stuff 15 years ago. Try calling local places and asking. You could make your bolts out of some standard M12x70 cap head screws.
I thought about making them but they need to be strong and I don't know enough about machining high tensile bolts to be confidant I wont bugger it up. At least if I buy something over spec that fits I know it wont break and leave me with no steering !
Cap head screws are usually grade 12.9. Get someone else to make it, like a fastener specialist.

Krikkit

27,943 posts

212 months

Tuesday 14th April 2015
quotequote all
Are they not available through the OEM? Usually specific bolts are cheap enough to buy direct.

Getragdogleg

Original Poster:

10,328 posts

214 months

Tuesday 14th April 2015
quotequote all
Krikkit said:
Are they not available through the OEM? Usually specific bolts are cheap enough to buy direct.
No, helpfully BMW decided to rivet the Giubo onto the UJs so if you change the UJs you need bolts like the ones I need. BMW don't do them, you can only get a whole assembly at many, many £s.