wheel refurb
Author
Discussion

mikal83

Original Poster:

5,340 posts

283 months

Thursday 16th April 2015
quotequote all
My wheels are tatty, the outer rim looks OK but the flats are peeling and corroded. I have been quoted 80 quid a wheel. They take the tyre off get them acid dipped then spray as opposed to powder coat etc. Whats best?

Foliage

3,861 posts

153 months

Thursday 16th April 2015
quotequote all
£80 a wheel seems a bit steep.

PositronicRay

29,121 posts

214 months

Thursday 16th April 2015
quotequote all
For a top job (stripping and refinishing) £80 per wheel is the right money.
£40 per wheel will buy an average job, okay as long as it's the 1st time it's been done.

mikal83

Original Poster:

5,340 posts

283 months

Thursday 16th April 2015
quotequote all
PositronicRay said:
For a top job (stripping and refinishing) £80 per wheel is the right money.
£40 per wheel will buy an average job, okay as long as it's the 1st time it's been done.
BUT PC or paint?

Howard-

4,964 posts

233 months

Thursday 16th April 2015
quotequote all
Foliage said:
£80 a wheel seems a bit steep.
Not for a decent, long-lasting finish it's not.

PositronicRay

29,121 posts

214 months

Thursday 16th April 2015
quotequote all
mikal83 said:
PositronicRay said:
For a top job (stripping and refinishing) £80 per wheel is the right money.
£40 per wheel will buy an average job, okay as long as it's the 1st time it's been done.
BUT PC or paint?
Powder coat is tough, paint will get you a better finish.

mikal83

Original Poster:

5,340 posts

283 months

Thursday 16th April 2015
quotequote all
anonymous said:
[redacted]
Ah the Halfords touch eh!

Foliage

3,861 posts

153 months

Friday 17th April 2015
quotequote all
Howard- said:
Foliage said:
£80 a wheel seems a bit steep.
Not for a decent, long-lasting finish it's not.
Ahh ok, I was using having got mine done for £50 each from Merc main dealer as a bench mark, they aren't perfect mind.

eztiger328

198 posts

141 months

Friday 17th April 2015
quotequote all
Bit of an extreme example:

I had my BBS RC split rims repaired, refurbed and rebuilt with a diamond cut last summer by Eddie the wheel man AKA the guy Lepsons directs all the work to that they cant be arsed to do biggrin . Plus VAT they came in at £140 a corner.

If they are 'standard' alloys and you dont want a diamond cut finish then £80 is about right for a decent job.

ZX10R NIN

30,664 posts

156 months

Friday 17th April 2015
quotequote all
I use Spit & Polish they've always done a good job for me, £80 per corner is spot on.

mikal83

Original Poster:

5,340 posts

283 months

Friday 17th April 2015
quotequote all
But who is near Plymouth!

Garvin

5,669 posts

208 months

Friday 17th April 2015
quotequote all
The last set of wheels I had done were £118 each . . . . . . . . but they were magnesium rims!

sjj84

2,396 posts

250 months

Saturday 18th April 2015
quotequote all
anonymous said:
[redacted]
Is there a story to go with this?

Patrick Bateman

13,223 posts

205 months

Saturday 18th April 2015
quotequote all
I used Lepsons and the finish was very good but I'm sceptical of claims of powder coating being tough.

When changing my wheels over one of the bolts fell from the hole and hit the rim, chipping it. I had done the same on my winter wheels (painted) and there wasn't even a mark left.