Performance tyre repair on shoulder
Discussion
Petrol heads,,
I’m looking for opinions on what to do regarding repair.. To set the scene I have just had all x4 MV1 alloys refurbed on my 330 along with x4 brand spanking new 18” Goodyear Eagle F1’s. I kid you not its been less than 2 weeks since fitment when I spotted a screw on the upper outside shoulder of the rear tyre. Pictures below help show my pain.
Its been 10+ years since I’ve sustained a nail or screw puncher of this type, and its sods law this happened days after fitment so im alittle out of touch with todays technology advances.
Some of the bigger named outfits have said the puncher is too close to the wall and can’t be repaired. Chances are if I took to a smaller independent shop I could get the repair done.
Question is… what would you do?
I’m looking for opinions on what to do regarding repair.. To set the scene I have just had all x4 MV1 alloys refurbed on my 330 along with x4 brand spanking new 18” Goodyear Eagle F1’s. I kid you not its been less than 2 weeks since fitment when I spotted a screw on the upper outside shoulder of the rear tyre. Pictures below help show my pain.
Its been 10+ years since I’ve sustained a nail or screw puncher of this type, and its sods law this happened days after fitment so im alittle out of touch with todays technology advances.
Some of the bigger named outfits have said the puncher is too close to the wall and can’t be repaired. Chances are if I took to a smaller independent shop I could get the repair done.
Question is… what would you do?
rockport said:
Petrol heads,,
I’m looking for opinions on what to do regarding repair.. To set the scene I have just had all x4 MV1 alloys refurbed on my 330 along with x4 brand spanking new 18” Goodyear Eagle F1’s. I kid you not its been less than 2 weeks since fitment when I spotted a screw on the upper outside shoulder of the rear tyre. Pictures below help show my pain.
Its been 10+ years since I’ve sustained a nail or screw puncher of this type, and its sods law this happened days after fitment so im alittle out of touch with todays technology advances.
Some of the bigger named outfits have said the puncher is too close to the wall and can’t be repaired. Chances are if I took to a smaller independent shop I could get the repair done.
Question is… what would you do?
Last question first: I'd buy a new tyre.I’m looking for opinions on what to do regarding repair.. To set the scene I have just had all x4 MV1 alloys refurbed on my 330 along with x4 brand spanking new 18” Goodyear Eagle F1’s. I kid you not its been less than 2 weeks since fitment when I spotted a screw on the upper outside shoulder of the rear tyre. Pictures below help show my pain.
Its been 10+ years since I’ve sustained a nail or screw puncher of this type, and its sods law this happened days after fitment so im alittle out of touch with todays technology advances.
Some of the bigger named outfits have said the puncher is too close to the wall and can’t be repaired. Chances are if I took to a smaller independent shop I could get the repair done.
Question is… what would you do?
BS AU 159 covers this sort of thing. http://www.btmauk.com/wp-content/uploads/2014/12/M...
Your tyre will be more than a 200 profile on that car.
Consequently, that screw looks like it's outside of the legal area for tyre repair (within the middle 70% of the tread is legal, the 15% either side of that is not legal).
Just my tuppenceworth. Awful luck, by the way.
I recently learned that you can have a vulcanised tyre repair done for about £30, once the tyre is off the wheel. This is to BS whatever and there are no restrictions on tread width because it's been revulcanised and is as good as new rather then being a simple plug repair. It can't be done by the rapidfit places, it takes 24 hours or so.
battered said:
I recently learned that you can have a vulcanised tyre repair done for about £30, once the tyre is off the wheel. This is to BS whatever and there are no restrictions on tread width because it's been revulcanised and is as good as new rather then being a simple plug repair. It can't be done by the rapidfit places, it takes 24 hours or so.

rockport said:
Google isn't being too helpful, does anyone know of a vulcanising facility in the South London / Kent area? :\
http://tadworthtyres.com/tyres/car/Maybe not quite your area but easy enough to get to.
I'd recommend vulcanising having done 140mph on a repaired motorbike tyre.
trickywoo said:
http://tadworthtyres.com/tyres/car/
Maybe not quite your area but easy enough to get to.
I'd recommend vulcanising having done 140mph on a repaired motorbike tyre.
TRICKYWOO!! you absolute legend!!!Maybe not quite your area but easy enough to get to.
I'd recommend vulcanising having done 140mph on a repaired motorbike tyre.
I just spoke to the tadsworth and spoke to the most helpful adviser... He talked me through the process and im taking the car to him next weekend.
Cost £18 or there about's! much better than £170!!! ITs not local no.. but it only 20mins on the M25 and as you say, easy to get to!
Thanks a million!
There's a place on the south coast (Fareham) that does vulcanised repairs (and has been for many years) - I know several people who have had them and it's perfectly safe http://www.ts-tyre-repairs.co.uk/
The places that can only do minor repairs will usually say it's "illegal" to repair outside that area either because they don't know about other repair methods or they just want to sell you a new tyre.
The places that can only do minor repairs will usually say it's "illegal" to repair outside that area either because they don't know about other repair methods or they just want to sell you a new tyre.
rockport said:
trickywoo said:
http://tadworthtyres.com/tyres/car/
Maybe not quite your area but easy enough to get to.
I'd recommend vulcanising having done 140mph on a repaired motorbike tyre.
TRICKYWOO!! you absolute legend!!!Maybe not quite your area but easy enough to get to.
I'd recommend vulcanising having done 140mph on a repaired motorbike tyre.
I just spoke to the tadsworth and spoke to the most helpful adviser... He talked me through the process and im taking the car to him next weekend.
Cost £18 or there about's! much better than £170!!! ITs not local no.. but it only 20mins on the M25 and as you say, easy to get to!
Thanks a million!

That would be fine with a normal repair - its not on the shoulder, its on the flat. I've done track days on repaired tyres with no ill effect, it is effectively as strong as the original tyre - if it wasn't repairing them wouldn't be legal. The places telling you it's too close to the shoulder are just looking to sell you tyres.
GreigM said:
That would be fine with a normal repair - its not on the shoulder, its on the flat. I've done track days on repaired tyres with no ill effect, it is effectively as strong as the original tyre - if it wasn't repairing them wouldn't be legal. The places telling you it's too close to the shoulder are just looking to sell you tyres.
+1Hi all,
Just picking up on this thread, as took the advice on here..
Have to say that Tadworth tyres were brilliant and helped me out too. I had close to a brand new conti Sport Contact 3 (£250 at the time) puncture close to the shoulder, no one would repair. Visited Tadworth, £20 later and 1 hour wait, a hot vulcanised repair, good as new. Dealt with Glen and he was great, really knew his stuff.. Complete no brainer when the tyre is fairly new..

Just picking up on this thread, as took the advice on here..
Have to say that Tadworth tyres were brilliant and helped me out too. I had close to a brand new conti Sport Contact 3 (£250 at the time) puncture close to the shoulder, no one would repair. Visited Tadworth, £20 later and 1 hour wait, a hot vulcanised repair, good as new. Dealt with Glen and he was great, really knew his stuff.. Complete no brainer when the tyre is fairly new..
I'm not comfortable with the term "good as new".
I don't disagree vulcanise repairs are very effective, but it still leaves a weak spot on the tyre. Tyres are more than just lumps of rubber, there's a complicated carcass with many belt runs across the tread cap which punctures also damage. Lobbing a bit of warm rubber in this area does not make the tyre as strong as it was when new.
I know I'm being pedantic.
I don't disagree vulcanise repairs are very effective, but it still leaves a weak spot on the tyre. Tyres are more than just lumps of rubber, there's a complicated carcass with many belt runs across the tread cap which punctures also damage. Lobbing a bit of warm rubber in this area does not make the tyre as strong as it was when new.
I know I'm being pedantic.
Gassing Station | General Gassing | Top of Page | What's New | My Stuff





