Blank Canvas, what would you do ?
Discussion
Ok, so you get given this, a brand new Escort Mk2 bodyshell, what would you do with it that doesnt involve selling, crushing or burning, for those folk, find a lease thread, this is for those who would like and enjoy the end result.
http://www.ebay.co.uk/itm/381963999635?ssPageName=...
For me, paint it bright red, modern brakes and suspension and possibly an S2000 engine, interior fairly nicely trimmed in Black leather.
http://www.ebay.co.uk/itm/381963999635?ssPageName=...
For me, paint it bright red, modern brakes and suspension and possibly an S2000 engine, interior fairly nicely trimmed in Black leather.
You know these shells are made in China right?
Also that thread on here where people cry, poop their pants and run to the internet police about people selling chassis numbers from rotten cars on eBay. It would be very hard to register one of these shells unless you could afford to spend 4-5k on a rotten escort just to scrap so you could have the chassis number and v5.
Anyway, I'd stick a warrior engine in it, some sort of sequential gearbox, atlas rear axle, x-pack bodykit and 15" minilites. No interior other than dashboard with digital clocks and a couple of bucket seats and harnesses. Cooler than a pink panther sipping whiskey on top of an iceberg.
Also that thread on here where people cry, poop their pants and run to the internet police about people selling chassis numbers from rotten cars on eBay. It would be very hard to register one of these shells unless you could afford to spend 4-5k on a rotten escort just to scrap so you could have the chassis number and v5.
Anyway, I'd stick a warrior engine in it, some sort of sequential gearbox, atlas rear axle, x-pack bodykit and 15" minilites. No interior other than dashboard with digital clocks and a couple of bucket seats and harnesses. Cooler than a pink panther sipping whiskey on top of an iceberg.
Cosworth YB is always a tempting option, but I'd be tempted to modernise it instead with an EcoBoost running gear. There'd be an awful lot of fabrication work involved and I'd want to rust-proof the shell so that I could drive it, come hell or high water.
My plans would probably end up leaving the shell the cheapest part of the build!
My plans would probably end up leaving the shell the cheapest part of the build!
Turreted rear, lowered,
x-pack wings and RS2000 nosecone.
Full MSA rollcage
Race seats and harnesses
Plastic side and rear windows
Widest 13" rims I could find running slicks.
2 litre pinto with a holbay head running twin 45's
5 speed box with straight cut gears.
Keep it road legal(obvoiusly without the slicks) for the odd blast.
Race the crap out of it otherwise.
x-pack wings and RS2000 nosecone.
Full MSA rollcage
Race seats and harnesses
Plastic side and rear windows
Widest 13" rims I could find running slicks.
2 litre pinto with a holbay head running twin 45's
5 speed box with straight cut gears.
Keep it road legal(obvoiusly without the slicks) for the odd blast.
Race the crap out of it otherwise.
Gassing Station | General Gassing | Top of Page | What's New | My Stuff




