Most recent mainstream production car with carbs?
Discussion
1994 Citroën BX. The carb on my 1.6 had a replacement jet fitted. For the first couple of months it sometimes stuck & car won't start but a tap with a hammer sorted that. The mechanic marked the spot I should tap with a white chalk cross.
Impressed the crew of the ferry to Jersey when I used that method to get the car started.
Impressed the crew of the ferry to Jersey when I used that method to get the car started.
From my days of carting a family about.
1986 D-reg Toyota Spacecruiser- 2l single carb.
1988 E-Reg Nissan Praire, 1.8l single carb.
I still own a 1989 Lancia Prisma- motronic fuel injection.
Obviously mechanical fuel injection has been around for yonks, but I think most carburettors went out on mainstream cars about 1990.
1986 D-reg Toyota Spacecruiser- 2l single carb.
1988 E-Reg Nissan Praire, 1.8l single carb.
I still own a 1989 Lancia Prisma- motronic fuel injection.
Obviously mechanical fuel injection has been around for yonks, but I think most carburettors went out on mainstream cars about 1990.
georgeyboy12345 said:
My Dad had a 1991 H reg Fiat Tempra 1.6 i.e. that was fuel injected, but you could get a non-i.e. version that was still carbed at the time I think
My dad had a J reg Fiat Tempra which was carbed. Having the choke handle located next to a digital dashboard was quite a contrast tech wise! It depends how one defines a carburettor. The Suzuki Swift had a 'single point fuel injection' system on certain models that was nothing more than standard Suzuki fixed jet carburettor body fitted with a servomotor to control certain aspects of the position of the throttle plate and a single fuel injector where the emulsion tube would normally go. It functioned identically to a carburettor in every way except for the fuel metering being done by a simple ECU and was used until at least 2002.
The whole thing is something of a grey area because there were ECU controlled carburettors back in the eighties. Some were equipped with servos to do things like adjust idle speeds and fuel mixture on the fly, so didn't really function any differently to the simple single point injection systems that remained in service into early 21st century. But are they carburettors proper? I don't know.
The whole thing is something of a grey area because there were ECU controlled carburettors back in the eighties. Some were equipped with servos to do things like adjust idle speeds and fuel mixture on the fly, so didn't really function any differently to the simple single point injection systems that remained in service into early 21st century. But are they carburettors proper? I don't know.
Missy Charm said:
It depends how one defines a carburettor. The Suzuki Swift had a 'single point fuel injection' system on certain models that was nothing more than standard Suzuki fixed jet carburettor body fitted with a servomotor to control certain aspects of the position of the throttle plate and a single fuel injector where the emulsion tube would normally go. It functioned identically to a carburettor in every way except for the fuel metering being done by a simple ECU and was used until at least 2002.
The whole thing is something of a grey area because there were ECU controlled carburettors back in the eighties. Some were equipped with servos to do things like adjust idle speeds and fuel mixture on the fly, so didn't really function any differently to the simple single point injection systems that remained in service into early 21st century. But are they carburettors proper? I don't know.
I'd probably make the distinction of whether the fuel is introduced to the airflow into the intake under pressure or under a vacuum. Fuel injection being the former and a carburettor being the latter. Anyway, the more basic variants of the Honda Civic sold in Australia into 1993 had a carburettor or two depending on the subvariant. Being cheap got too expensive for Honda in the end and they got fuel injection, like the rest of the Civic range, in 1994. The GL got the required badge upgrade too - becoming the GLi.The whole thing is something of a grey area because there were ECU controlled carburettors back in the eighties. Some were equipped with servos to do things like adjust idle speeds and fuel mixture on the fly, so didn't really function any differently to the simple single point injection systems that remained in service into early 21st century. But are they carburettors proper? I don't know.
I had a P reg 1.3 OHV Escort with a carb. It was a proper grumpy no spec car with wind up windows and a drawing of a car where the rev counter should be.
It had a 'fleet only no warranty' or something to that affect stamped plate on front slam panel. I'd never seen one like it before or since.
It had a 'fleet only no warranty' or something to that affect stamped plate on front slam panel. I'd never seen one like it before or since.
Edited by Janesy B on Thursday 24th February 11:22
Gassing Station | General Gassing | Top of Page | What's New | My Stuff




