disposing of waste 2-stroke fuel
Discussion
i have a jerry can of stale 2-stroke petrol mix that I need to dispose of... it seems the local recycling centres have all stopped taking fuel. I don't really want to pay for a service, and they all seem set up for large scale disposals anyway. I have emailed the council but nothing forthcoming yet...
Any ideas how I can get rid of this?
Any ideas how I can get rid of this?
Panamax said:
When I had some to deal with I just put a bit of it in the car each time I filled the car with petrol. The 2-stroke will have been so diluted that it made no difference.
Same here, I only had about a pint to deal with and I didn't want to put it in my car so I diluted it in with my lawnmower petrol. Zetec-S said:
Have you got a shed to get rid of?
That's the only PH-worthy response so far.I recommend https://www.youtube.com/@UncleRob/videos for inspiration.
Blown2CV said:
i have a jerry can of stale 2-stroke petrol mix that I need to dispose of... it seems the local recycling centres have all stopped taking fuel. I don't really want to pay for a service, and they all seem set up for large scale disposals anyway. I have emailed the council but nothing forthcoming yet...
Any ideas how I can get rid of this?
I have the same problem, approx 10 litres of pre-mixed 2 stroke and petrol in a 20l Jerry can. Dump won’t take it so it’s sat here since I changed my 2T for a 4T motorbike. 6 years!Any ideas how I can get rid of this?
I wonder if I leave that Jerry can at the end of my driveway, will it be there tomorrow

Blown2CV said:
i have a jerry can of stale 2-stroke petrol mix that I need to dispose of... it seems the local recycling centres have all stopped taking fuel. I don't really want to pay for a service, and they all seem set up for large scale disposals anyway. I have emailed the council but nothing forthcoming yet...
Any ideas how I can get rid of this?
Pour it in to the car you least care about a litre at a time when you fill it up, until it's all gone. Even if it's only a medium car taking 50 litres at a time that's diluted to 2% or probably 0.1% two stroke oil so it'll be trivial. Any ideas how I can get rid of this?
That's what I did with a load of old two stroke mixed fuel when I had exactly the same problem simply because it's the only practical option.
It'll take effectively forever to evaporate from a jerry can with the lid open, even a wide shallow pan will evaporate a litre in about a day at 20 degrees if you can keep air moving over it but I'd do it somewhere very open or you'll be filling the space with a lovely petrol vapour. It's heavier than air so will settle into dips and ditches nearby too.
Edited by GeniusOfLove on Tuesday 4th August 15:17
Gassing Station | General Gassing | Top of Page | What's New | My Stuff



