Diesel engine oil in a petrol engine?
Discussion
I have about four litres of Mobil 1 0W-40 (fully synthetic) remaining, leftover oil from my last car. I now have a Lexus LS400 and was wondering if it is ok to use in a petrol engine? I've tried, unsuccessfully, to find a satisfactory answer elsewhere.
I have no further use for it and I'd rather waste £30 of oil.
I have no further use for it and I'd rather waste £30 of oil.
I've seen it asserted that Mobil-1 and Mobil-1 Turbo Diesel are the same oil in different containers. See if you can find the data sheets - they're apparently identical.
What does it say on the containers? MB, for instance, make no special recommendation (unless the car has a DPF) and you'll find both versions of the oil are MB229.5 approved.
What does it say on the containers? MB, for instance, make no special recommendation (unless the car has a DPF) and you'll find both versions of the oil are MB229.5 approved.
Here's the oil's specs:

The manual recommends "API SH, "Energy Conserving II" or SJ "Energy Conserving" multigrade engine oil or ILSAC multigrade engine oil". Recommended viscosities are 5W-30, 10W-30 (for UK climates), 15W-40, 20W-50.
My main concern is that TD oil might contain extra detergents or something that might bugger up a sensor, etc.

The manual recommends "API SH, "Energy Conserving II" or SJ "Energy Conserving" multigrade engine oil or ILSAC multigrade engine oil". Recommended viscosities are 5W-30, 10W-30 (for UK climates), 15W-40, 20W-50.
My main concern is that TD oil might contain extra detergents or something that might bugger up a sensor, etc.
Edited by Parrot of Doom on Monday 21st March 13:41
Gassing Station | General Gassing | Top of Page | What's New | My Stuff


