Helpful mechanic required in Shropshire
Helpful mechanic required in Shropshire
Author
Discussion

ribbit

Original Poster:

58 posts

223 months

Thursday 28th April 2011
quotequote all
I sheared a wheel bolt using a torque wrench at the weekend. The bolt is inaccessible from either side of the hub. Grrr...

Can anyone recommend a good trad mechanic in Shropshire (ideally Shrewsbury/Telford) who could have a go at removing the bolt?. I've tried a tyre fitting place and they sadly can do nothing.

KenBlocksPants

7,544 posts

213 months

Thursday 28th April 2011
quotequote all
Court Autos in Tweedale (Telford) will be very helpful.


ribbit

Original Poster:

58 posts

223 months

Thursday 28th April 2011
quotequote all
Thanks, I'll give them a call

ribbit

Original Poster:

58 posts

223 months

Tuesday 3rd May 2011
quotequote all
No joy. The bolt is below the surface of the hub. Really disappointed no-one seems able to deal with this locally. Looks like a new hub is my only solution.

Bugeyeandy

12,612 posts

226 months

Tuesday 3rd May 2011
quotequote all
Have you got a pic, I'm struggling to see how it can be inaccessible from the front face of the hub.

I managed to shear one off flush some years ago and we got it out easily by drilling and using an extractor.

If you can't find anyone to do it in-situ it might be worth whipping the hub off and taking it to your local machine shop for them to drill it out.

ribbit

Original Poster:

58 posts

223 months

Tuesday 3rd May 2011
quotequote all
It's accessible, inasmuch as it is visible, but there is nothing to grip. My first thought was to drill a pilot hole and use an easyout, but I am struggling to find someone to do this for me. I'd have a go myself, except I'd need to purchase a suitably small extractor and cobalt bit, plus I'm busy with other things at the moment.

DownUnder.

828 posts

206 months

Tuesday 3rd May 2011
quotequote all
If you can find a friendly welder, they can weld a socket onto the nut for you... Thats how I got my sheared/jarred spark plug off

Fish981

1,441 posts

214 months

Tuesday 3rd May 2011
quotequote all
A 2nd hand hub may be cheaper than having the old bolt drilled out.

ribbit

Original Poster:

58 posts

223 months

Tuesday 3rd May 2011
quotequote all
Fish981 said:
A 2nd hand hub may be cheaper than having the old bolt drilled out.
This is the conclusion I have reached. Thanks for all the suggestions.

voicey

2,493 posts

216 months

Tuesday 3rd May 2011
quotequote all
Soak it in Plus Gas, drill a hole and use a reverse threaded tap. Unless it's sized in there it'll come out.

ribbit

Original Poster:

58 posts

223 months

Wednesday 4th May 2011
quotequote all
Yes, shouldn't be seized at all so should come out without brute force. I'll swap the hub over so at least I can get running again, but I'll put the original hub aside for when I have a bit more time.