996 Turbo PCM1 removal.
996 Turbo PCM1 removal.
Author
Discussion

Nobby Diesel

Original Poster:

2,117 posts

279 months

Tuesday 17th May 2016
quotequote all
I need to remove the PCM1 unit from the centre console.
Can anyone advise the procedure for this?
Cheers.

Jimbo965

172 posts

173 months

Tuesday 17th May 2016
quotequote all
You need to remove the switch covers either side (they unclip from the bottom). There are 2 spring clamps either side of the PCM which need to be pressed in and then you can carefully pull the PCM out and disconnect the plugs at the back.

This is from official 996TT repair manual PDF which you can find on the net. Can't easily find the link for you now but think I got mine from Rennlist.



mr pg

2,060 posts

233 months

Tuesday 17th May 2016
quotequote all
Very easy to do as described above. Carefully prise surround away, press in clips, and extract.

Nobby Diesel

Original Poster:

2,117 posts

279 months

Tuesday 17th May 2016
quotequote all
Thanks gents - done.
Now, where to get it repaired..............?
Any suggestions?

Jimbo965

172 posts

173 months

Tuesday 17th May 2016
quotequote all
Cartronics have PCM repairs on their website but haven't used them. There are some DIY instructions on the net e.g screen replacement

Moosh

1,122 posts

249 months

Wednesday 18th May 2016
quotequote all
what is wrong with it?

Nobby Diesel

Original Poster:

2,117 posts

279 months

Wednesday 18th May 2016
quotequote all
the screen doesn't function - completely black.

Moosh

1,122 posts

249 months

Wednesday 18th May 2016
quotequote all
does the sound come on or is there no power

Jimbo965

172 posts

173 months

Wednesday 18th May 2016
quotequote all
I guess you checked the fuse (simplest fix first...)

Could also try re-seating the connectors and see if that brings it back to life.
There are places online which offer repair around £300.

http://www.ebay.co.uk/itm/Porsche-PCM1-Becker-BE25...


Moosh

1,122 posts

249 months

Wednesday 18th May 2016
quotequote all
I was wondering if you had tried to reset the unit? Booting on whilst holding down three buttons which I think is 1, 3 and 0. But I may be wrong on the button numbers.

Moosh

1,122 posts

249 months

Wednesday 18th May 2016
quotequote all
Just googled the reset and have found mention of button 1, 4 & 8 whilst powering on

Nobby Diesel

Original Poster:

2,117 posts

279 months

Wednesday 18th May 2016
quotequote all
Thanks gents - had tried all manner of things before I removed it.
Powered up and played CDs, radio and even cassette (how quaint!)
It's the screen that's had enough. Sent away to Maple Audio for repair.
Will report on the result in a week or so.

Mattlan

394 posts

233 months

Saturday 31st December 2016
quotequote all
I know it was a while ago, but what was the outcome Nobby??

Nobby Diesel

Original Poster:

2,117 posts

279 months

Saturday 31st December 2016
quotequote all
All sorted by Maple.
They quoted over the telephone, based on my description of the fault, TBC once they received.
Price was confirmed, repair completed and unit returned, all within a week or so.
Refitted and works perfectly.

Mattlan

394 posts

233 months

Sunday 1st January 2017
quotequote all
Thanks for taking the time to respond Nobby,

Happy New Year!!