570S/GT dimensions for garage opening.....
570S/GT dimensions for garage opening.....
Author
Discussion

SirAndy

Original Poster:

39 posts

188 months

Thursday
quotequote all
Hi All,
I’m looking to change cars, as I’ve had this ‘993 for 14 years now and quite like the look of a 570S/GT.
My garage is 6000mm long, and 3000mm wide, and the door opening is 2130mm. Height looks good too, especially with having the pitched roof and open joists. However, the up-and-over gubbins has those arms and springs which reduce the entrance width to 2030mm at a height of 1050mm.
Looking at the dimensions of the 570, I can see the I have plenty of room inside the garage (if I get rid of that junk piled up!), but not sure about getting it through the door.
This post (https://www.pistonheads.com/gassing/topic.asp?h=0&f=242&t=2072003) suggests the width with mirrors folded is 2005mm but I haven’t seen that anywhere else. That would be a tight squeeze, but would work.
This post (https://www.pistonheads.com/gassing/topic.asp?h=0&f=242&t=1863852) has more info, and I’ve just downloaded the user manual that shows some of the dimensions.

Question - can anyone confirm the width with mirrors folded?
Is the car physically narrower above the 1050mm height – and at what height are the mirrors?

I can’t alter the stonework (listed area) but may be able to change the door opening type to get rid of those arms and springs (not sure how though), and add a motor too.

Cheers – Andy.

davek_964

11,400 posts

206 months

Thursday
quotequote all
Mirrors don't reduce the width of McLaren's noticeably when folded - they don't so much fold as rotate.

TBCTBC

1,693 posts

120 months

Thursday
quotequote all
It’s in the manual. For a 570s coupe:

The width with the doors open is 3,225mm.

The width with doors and mirrors closed is 2,095mm.

Grey_Area

4,384 posts

284 months

Thursday
quotequote all
I fitted a Horman sectional, behind the entranceway of the garage; it helped a bit as it takes all the opening kit out of the way, and places it against the wall on the inside.
I think I have about 3" either side of the wing mirrors now. With a 2270mm opening.

Might be worth considering.

Edited by Grey_Area on Thursday 19th November 15:13

mrbigshot

25 posts

83 months

Thursday
quotequote all
Have a look at Myparker.co.uk I have a different car but same problem. I had one fitted that resolved my issues totally (I couldn’t get out of my car once in the garage and it was a very tight squeeze through my garage door. And it’s quite cool too😁. Not cheap but long term far more reasonable than having to move house with a double garage.

W12GT

4,513 posts

252 months

Thursday
quotequote all
I think that’s a tight fit through the doors. I have two double garages, both have twin single doors, 2750mm for a pair of openings into 6.5m wide and 2175mm for the other two that open into 5.5m. I hate taking cars in and out of the smaller doors and as a result rarely use the cars in that garaging - especially if leaving or arriving in the dark.

Definitely worth looking at behind the reveal options to give more room but obviously the available length shortens noticeably.

Great cars though so hopefully you can make it work

Edited by W12GT on Thursday 19th November 23:07

SirAndy

Original Poster:

39 posts

188 months

TBCTBC said:
The width with doors and mirrors closed is 2,095mm.
Thanks.
So even if I could get to use the full 2130mm, I would still only have 35mm to spare!
….not sure this is going to work banghead

davek_964

11,400 posts

206 months

SirAndy said:
Thanks.
So even if I could get to use the full 2130mm, I would still only have 35mm to spare!
.not sure this is going to work banghead
I kept my pre-McLaren cars in the garage - but it was obvious that even if I could get a McLaren into the garage, I'd have to live in it - since I wouldn't be able to open the doors.

So, I had a choice: Don't buy a McLaren, or buy one and accept that I'd be keeping it on the driveway.

No regrets.


SirAndy

Original Poster:

39 posts

188 months

Grey_Area said:
I fitted a Horman sectional, behind the entranceway of the garage; it helped a bit as it takes all the opening kit out of the way, and places it against the wall on the inside.
I think I have about 3" either side of the wing mirrors now. With a 2270mm opening.

Might be worth considering.
I like this idea, but as above - I’m still only going to get 2130mm max width and can’t do anything about the stone pillars.
It’s a shame because I have plenty of internal width and length (3m x 6m) - but just can’t get through the door safely censored

SirAndy

Original Poster:

39 posts

188 months

davek_964 said:
I kept my pre-McLaren cars in the garage - but it was obvious that even if I could get a McLaren into the garage, I'd have to live in it - since I wouldn't be able to open the doors.

So, I had a choice: Don't buy a McLaren, or buy one and accept that I'd be keeping it on the driveway.

No regrets.
Thanks Dave - I saw your dilemma on the old threads I linked above….
I had my ‘993 on the driveway of my last house for 9 years (I’d had the garage converted) but got so paranoid I sold up and moved!
I’m not sure I could live with that again, and I’m not sure Mrs. S would go with another house move just so I can have the car I want. Plus, she loves the Porsche

I’ve also started looking at F360’s smile

SirAndy

Original Poster:

39 posts

188 months

mrbigshot said:
Have a look at Myparker.co.uk I have a different car but same problem. I had one fitted that resolved my issues totally (I couldn t get out of my car once in the garage and it was a very tight squeeze through my garage door. And it s quite cool too?. Not cheap but long term far more reasonable than having to move house with a double garage.
Inside space is fine, but I currently go in at an angle so that there is plenty of space at one side. This solution would take the car in centrally - and would also require a flat surface outside the door. I have a pronounced decline….
Plus £5.5k getmecoat

Grey_Area

4,384 posts

284 months

SirAndy said:
Grey_Area said:
I fitted a Horman sectional, behind the entranceway of the garage; it helped a bit as it takes all the opening kit out of the way, and places it against the wall on the inside.
I think I have about 3" either side of the wing mirrors now. With a 2270mm opening.

Might be worth considering.
I like this idea, but as above - I m still only going to get 2130mm max width and can t do anything about the stone pillars.
It s a shame because I have plenty of internal width and length (3m x 6m) - but just can t get through the door safely censored
At a larger cost, new door header, open up entryway, fit new door behind entryway. Probably 2-3k all in.
Problem resolved for any future car purchases that way, and with enhanced security, and garage door functionality/insulation.

SirAndy

Original Poster:

39 posts

188 months

W12GT said:
I think that s a tight fit through the doors. I have two double garages, both have twin single doors, 2750mm for a pair of openings into 6.5m wide and 2175mm for the other two that open into 5.5m. I hate taking cars in and out of the smaller doors and as a result rarely use the cars in that garaging - especially if leaving or arriving in the dark.

Definitely worth looking at behind the reveal options to give more room but obviously the available length shortens noticeably.

Great cars though so hopefully you can make it work

Edited by W12GT on Thursday 19th November 23:07
Hi - thanks for this.
You are lucky to have so much garage space. Maybe on my next house move….
I would love to make it work, but I think the best I can do is a behind-the-reveal solution, but that would still only give me 2130mm, and if this is a no-go given feedback from current owners they I may have to reconsider my replacement car choice frown

The real shame is that the internal size is fine, so no problem getting in and out of the car - it’s just those damn big stone pillars that stop the car getting through the door!
When I moved into this house it was a 10 year plan, as I knew I would start to struggle managing the land that came with it when I got to my late sixties. I’m now 5 years off that target, so I know I will be moving again and the next place will definitely have a large double.

So - stick with the ‘993 or look for that F360 that should fit??????

davek_964

11,400 posts

206 months

SirAndy said:
So - stick with the 993 or look for that F360 that should fit??????
F360s are brilliant cars - I loved mine (at least until it destroyed the top end on one bank). It only really began to feel old when I was driving it after buying the 650 - but that shouldn't be an issue if you're changing from a 993.

Having said that - like most things, they've got expensive and for similar money, they are going to be a long way behind the McLaren. My 360 was in a different league to my 964 though.

SirAndy

Original Poster:

39 posts

188 months

davek_964 said:
F360s are brilliant cars - I loved mine (at least until it destroyed the top end on one bank). It only really began to feel old when I was driving it after buying the 650 - but that shouldn't be an issue if you're changing from a 993.

Having said that - like most things, they've got expensive and for similar money, they are going to be a long way behind the McLaren. My 360 was in a different league to my 964 though.
I know what you mean, I’ve seen the prices of 360’s now, and there’s hardly any for sale! I should have gone for it 2 years ago when I was first considering it.
For sure the ideal change would be for a Mc570 though…. cry

SirAndy

Original Poster:

39 posts

188 months

Grey_Area said:
At a larger cost, new door header, open up entryway, fit new door behind entryway. Probably 2-3k all in.
Problem resolved for any future car purchases that way, and with enhanced security, and garage door functionality/insulation.
Unfortunately, listed building so getting the go ahead to alter the stone pillars is a nightmare.
We live in a converted farmhouse on a listed park, with a mews courtyard and garage block.
Plus, I’d also need to match the garage door design with the existing one, but change to a sectional roller type and larger. So far, I haven’t been able to find one…..

interstellar

5,133 posts

177 months

SirAndy said:
TBCTBC said:
The width with doors and mirrors closed is 2,095mm.
Thanks.
So even if I could get to use the full 2130mm, I would still only have 35mm to spare!
.not sure this is going to work banghead
Isn't it the same for single garages?

Standard width is 2134mm so someone on here must confirm they get in. I would be surprised no one has a Mclaren in a single garage.


Edited to add, i now see your problem. I am in a new build and have a single garage so just measured it. I was surprised to see they are now making them bigger for newer cars and mine is in fact 2420mm as a standard Hormann door so its 8ft not like yours.

Sorry but yes it will be difficult. Assume with your Grade 2 listing having a metal car port or something wont work for you?

Edited by interstellar on Friday 20th November 12:22

SirAndy

Original Poster:

39 posts

188 months

interstellar said:
Isn't it the same for single garages?

Standard width is 2134mm so someone on here must confirm they get in. I would be surprised no one has a Mclaren in a single garage.

Edited to add, i now see your problem. I am in a new build and have a single garage so just measured it. I was surprised to see they are now making them bigger for newer cars and mine is in fact 2420mm as a standard Hormann door so its 8ft not like yours.

Sorry but yes it will be difficult. Assume with your Grade 2 listing having a metal car port or something wont work for you?

Edited by interstellar on Friday 20th November 12:22
I will measure again, as it could well be 2134mm.
I have found that changing the door opening mechanism from a Retractable (torsion springs at the sides) to a Canopy (torsion spring above the door) will give full width by removing the arms an springs.
It would still be great to hear if anyone does get a Mac into an opening of this size though?

Metal car port - hah, not a chance in hell, even if it froze over.

650S

216 posts

201 months

SirAndy said:
Grey_Area said:
I fitted a Horman sectional, behind the entranceway of the garage; it helped a bit as it takes all the opening kit out of the way, and places it against the wall on the inside.
I think I have about 3" either side of the wing mirrors now. With a 2270mm opening.

Might be worth considering.
I like this idea, but as above - I m still only going to get 2130mm max width and can t do anything about the stone pillars.
It s a shame because I have plenty of internal width and length (3m x 6m) - but just can t get through the door safely censored
Perhaps find a good builder with a Stihl 461 masonry chain-saw, study the lintel pads, figure out how much can be removed to increase ope-width, and then fit a new door as already suggested. I'd guess there is up to 75mm potential each side. The saw just needs a 4x2" batten each side to act as a guide / straight edge. Its clean and quick..... if the pads permit.
If they don't permit, then ACRO the roof and replace the lintel and trim the sides as described.

Enjoy 570 smile


ex-devonpaul

1,762 posts

168 months

Yesterday (09:32)
quotequote all
650S said:
Perhaps find a good builder with a Stihl 461 masonry chain-saw, study the lintel pads, figure out how much can be removed to increase ope-width, and then fit a new door as already suggested. I'd guess there is up to 75mm potential each side. The saw just needs a 4x2" batten each side to act as a guide / straight edge. Its clean and quick..... if the pads permit.
If they don't permit, then ACRO the roof and replace the lintel and trim the sides as described.
I was going to suggest similar, however I wouldn't get the walls cut back. The cuts will be clean and sharp and unless you reface the stonework it will look wrong. We had some bifold doors installed and after they cut the opening we decided to get the edge brics taken out and turned around or replaced.

So a very similar job - check/replace the lintel, then get a good brickie/mason to take the blocks from the sides and shuffle/cut them to make the opening wider, cleat cut ends can be used on the internal joint where they are less obvious.

But otherwise you're not getting one in there.