How to tell if my Rolec wall charger still works
Discussion
I have had one of these Rolecs since 2018. Apart from one contactor failure (touch wood) which was fixed under warranty, it has been fine and used thousands of times to recharge my better half s BMW i3 and my company PHEV. If you can confirm it s working stick with it: what about a dealer demo to test it?!
Note: the corona ring only lights up when plugged in, changes to green when charging and back to blue when fully charged (or the car s preset value).
I note it’s untethered - no charge cable. If you go for a plug-in car then you might want to get it switched to a tethered type (as mine is). More convenient but there are other considerations to.
Note: the corona ring only lights up when plugged in, changes to green when charging and back to blue when fully charged (or the car s preset value).
I note it’s untethered - no charge cable. If you go for a plug-in car then you might want to get it switched to a tethered type (as mine is). More convenient but there are other considerations to.
Edited by zephyr6 on Tuesday 28th April 21:08
Edited by zephyr6 on Tuesday 28th April 21:10
Many thanks for the suggestions.There's a fella down the road who has an electric Kia. I might ask him if he wouldn't mind testing it. He's a bit techy as well which should help! My daughter has just got a VW ID Buzz so it's a useful fall back in case she is low on charge when she visits.
Gassing Station | EV and Alternative Fuels | Top of Page | What's New | My Stuff


