throttle sticking at 6,000 revs
Discussion
Thanks the advice is appreciated!
But honestly if I touch anything engine related the next thing that happens is usually terminal. Yes I am that bad.
But fortunatley have a brother-in-law who can strip and re assemble any machine from a saxophone to a combine harvester using only his fingernails...in the dark :-)
N2H
But honestly if I touch anything engine related the next thing that happens is usually terminal. Yes I am that bad.
But fortunatley have a brother-in-law who can strip and re assemble any machine from a saxophone to a combine harvester using only his fingernails...in the dark :-)
N2H
TuxMan said:
Hi Nicky, be very supprised if it's not the throttle cable as it is routed past the front turbo and down the tunnel , normally the turbo cooks it !!! You have to run a new cable down the drivers cill . Tux
My Throttle cable is routed down the offside sill, is this something they changed on later models?You don't even have to disconnect the throttle cable. With the engine off, first inspect the throttle body to see if it's stuck open. If it is, give the cable a pull to see if the cable is holding the throttle open, or if the cable is moving freely. If the throttle isn't stuck open, try rotating the cam by hand, to make sure it moves freely. Make sure nothing (like the breather hose) can interfere with the movement of any of the throttle parts. If the cam moves freely, pull on the cable to see if it moves OK - you may need someone to sit inside the car to press the accelerator pedal while you watch to see if everything moves smoothly...
R0162 said:
TuxMan said:
Hi Nicky, be very supprised if it's not the throttle cable as it is routed past the front turbo and down the tunnel , normally the turbo cooks it !!! You have to run a new cable down the drivers cill . Tux
My Throttle cable is routed down the offside sill, is this something they changed on later models?NickyTwoHats said:
Sometimes, just sometimes when I do the same with the accelerator peddle it sticks at the revs I take it to.
Any use?
Exact sypmtons I had, The inner part of the cable on my 3R was about to let go at the pedal, was fortunate it was the inner cable, in that I sent the replacement inner down the original outer and hey-presto all fine.Any use?
Only once I disconnected from the throttle pedal and passed it out the front of the car I could see the inner had un-wravelled and was about to let go!
Gassing Station | Noble | Top of Page | What's New | My Stuff




- but at least I still have a Noble in the garage