Leaky nipples
Author
Discussion

2.5bluenob

Original Poster:

1,620 posts

205 months

Sunday 15th May 2011
quotequote all
Hi all, My brake bleeding nipples look as if they are leaking from the thread. Can PTFE tape be used or will it be eaten bby the fluid
Cheers
Steve

sunoco69

5,274 posts

194 months

Sunday 15th May 2011
quotequote all
The wife had those once, doc gave her oinment and it cleared up in no time.

JLSELAN

405 posts

262 months

Sunday 15th May 2011
quotequote all
2.5bluenob said:
Hi all, My brake bleeding nipples look as if they are leaking from the thread. Can PTFE tape be used or will it be eaten bby the fluid
Cheers
Steve
Definitely do not use PTFE tape on those threads. Sealing surface is on the taper at the end of the bleed screw, and a good seal should require relatively little torque. If there is any evidence of corrosion on the taper just replace with a new one.

D_G

1,938 posts

238 months

Sunday 15th May 2011
quotequote all
JLSELAN said:
2.5bluenob said:
Hi all, My brake bleeding nipples look as if they are leaking from the thread. Can PTFE tape be used or will it be eaten bby the fluid
Cheers
Steve
Definitely do not use PTFE tape on those threads. Sealing surface is on the taper at the end of the bleed screw, and a good seal should require relatively little torque. If there is any evidence of corrosion on the taper just replace with a new one.
Yep, the threads are not the sealing surface! Take em out and look at the nipples and housings for pitting / debris.

2.5bluenob

Original Poster:

1,620 posts

205 months

Sunday 15th May 2011
quotequote all
thanks Guys