Track rod / Steering tie rod
Track rod / Steering tie rod
Author
Discussion

b19nor

Original Poster:

326 posts

192 months

Saturday 21st May 2011
quotequote all
Hi guys i have noticed when i am on full lock to the right my passenger inside edge of the wheel rubs on hub frame, but notice there is a slight bend/movement on my track rod/Steering tie rod. Could this be the problem and replace it?

Dose any one no what the part no is and off that i can get it from parts company or has it to be Noble?

5paulmv

1,250 posts

200 months

Sunday 22nd May 2011
quotequote all
hi there check if your car as eaten the plastic bump stop on the steering rack under the rubber boot check both sides

b19nor

Original Poster:

326 posts

192 months

Sunday 22nd May 2011
quotequote all
Hi not looked at that. Ware/how do i locate that? i have uploded a pic of problem.

Blu3R

2,380 posts

228 months

Sunday 22nd May 2011
quotequote all
That's the anti roll bar mounting that you appear to be rubbing on.

b19nor

Original Poster:

326 posts

192 months

Sunday 22nd May 2011
quotequote all
Hi Paul ware is bump stop on the steering rack and location of them.

b19nor

Original Poster:

326 posts

192 months

Sunday 22nd May 2011
quotequote all
Thanks Rob how can i stop that? i noticed when jacked up and looking one of the Steering Tie Rods/Track Rods has slight bend. Could Tracking be causing this or bump stop on the steering rack?

5paulmv

1,250 posts

200 months

Monday 23rd May 2011
quotequote all
hi again seen your pic and would definatly say its a knackered steering rack bump stop (part no m12sus45 tk23** contact james at southwest loyus hestocks them they fit one per side under the gaitor on steering rack to stop excessive throw of the steering i had this issue when first started working on car itsa easy fix put a groove round middle on outside to take a tie wire then cut in half slot over column then tie wire together saves touching any settings hope this helps