Will this Harness fit a Noble?
Will this Harness fit a Noble?
Author
Discussion

R0162

Original Poster:

2,435 posts

193 months

Sunday 25th March 2012
quotequote all
http://www.merlinmotorsport.co.uk/p3133/WILLANS-SU...

Can anybody please advise if this will fit our cars..my mother in law threw away my old ones frown

Thanks

Chris

wessexrfc

4,326 posts

215 months

Sunday 25th March 2012
quotequote all
Look a close match to me. Same fixing brackets.

alex s

2,105 posts

265 months

Sunday 25th March 2012
quotequote all
If you are replacing them, why not buy proper 3" wide harness that wont snap your collar bones in a big shunt. Specially if you are doing a lot of track work. Also worth getting a five point to stop submarining..

R0162

Original Poster:

2,435 posts

193 months

Sunday 25th March 2012
quotequote all
wessexrfc said:
Look a close match to me. Same fixing brackets.
ye thats what i thought..i can't see any reason they wouldnt fit..but just wondered it i was missing anything ...

anotherdom

535 posts

197 months

Monday 26th March 2012
quotequote all
alex s said:
Also worth getting a five point to stop submarining..
I've been looking at this. I run a Schroth Profi II ASM but some additional security would be welcome. Have you used a T or V crutch, or a simple neg G strap? How have you secured it to the chassis?

OP, yes, a Caterham style belt will bolt straight in, though you may find the shoulder harness points require sleeving, I recall mine weren't 7/16''.

Thanks, Dom.

Will M12

47 posts

174 months

Monday 26th March 2012
quotequote all
R0162 said:
http://www.merlinmotorsport.co.uk/p3133/WILLANS-SU...

Can anybody please advise if this will fit our cars..my mother in law threw away my old ones frown

Thanks

Chris
Yes they fit I have them in my car

R0162

Original Poster:

2,435 posts

193 months

Monday 26th March 2012
quotequote all
anotherdom said:
I've been looking at this. I run a Schroth Profi II ASM but some additional security would be welcome. Have you used a T or V crutch, or a simple neg G strap? How have you secured it to the chassis?

OP, yes, a Caterham style belt will bolt straight in, though you may find the shoulder harness points require sleeving, I recall mine weren't 7/16''.

Thanks, Dom.
Neg G strap will work, straight to the floor pan as long as a spreader plate is used,.. i do sometimes find myself not being able to look over the dash and there never seems to be a good time to adjust...for an extra £15 cost i may fit one but i imagine it could be a bit uncomfortable...


http://www.merlinmotorsport.co.uk/p3155/SPREADER-P...

http://www.merlinmotorsport.co.uk/p14639/WILLANS-N...