rainey day job
Discussion
Gadgeroonie said:
mobil 1 is quite thin oil
make sure its not too thin - can affect things like hydraulic tappets etc
If its 0-40 then it will be fine. its the second number that dictates the operating viscosity. The first is just for when cold i.e. starting. lower the better as it means the oil will circulate and do its job better when you first turn the key. Once up to temp though 0-40, 5-40 and 10-40 all do the same jobmake sure its not too thin - can affect things like hydraulic tappets etc
It comes down to set standards. A 40 oil flows a certain amount at 100 degrees. All 40 oils will flow the same at 100 degrees or close to it. That way when a manufacturer recommends a 40 oil it knows any 40 will work.
On a side note even the noble wiki says some noble specialist use mobil 1
On a further side note, I've just bought 10 litres of shell helix ultra 5w40 for £55 delivered from opie oils ready for its service
On a side note even the noble wiki says some noble specialist use mobil 1
On a further side note, I've just bought 10 litres of shell helix ultra 5w40 for £55 delivered from opie oils ready for its service
anotherdom said:
Chapppers said:
Noble recommend 5w40 Shell Helix Ultra
Just bought some from Euro Car Parts - about £15 cheaper than Shell garage for 5 litres.
Gassing Station | Noble | Top of Page | What's New | My Stuff


