More welding exhaust bracket again!
More welding exhaust bracket again!
Author
Discussion

M12WTF

Original Poster:

171 posts

204 months

Monday 18th June 2012
quotequote all
Right still having teething problems since Noble ownership.

My Noble had a knocking noise around three months ago which turned out to be an exhaust bracket. 300 or so quid later the guys down in a 'Valley that's full of Moles' had done the welding. Problem solved.

I went from 1st to 2nd gear ealier (giving it some)in the week and guess what...its back.

I obviously don't want to have to pay for the same thing to be fixed.(which hopefully i wont) So, either it wasn't done successfully the first time or its a fault with the brackets.

Could anyone shed any light on this for me? is more welding worth it? would a recently welded part just brake again under stress?

Many thanks

AMG Merc

11,955 posts

282 months

Monday 18th June 2012
quotequote all
Can you get the car to The Ace Cafe on Wednesday evening whilst it is still light? Some of the lads may be able to help.

simonx50

818 posts

189 months

Monday 18th June 2012
quotequote all
sounds expensive to weld a bracket..money better spent on a replacement exhaust IMO

Plumber1

630 posts

190 months

Monday 18th June 2012
quotequote all
Is it the bracket attached to the pipe and silencer on passenger side, if so it will keep braking, lost count how many times mine has been rewelded, if you don't get it done it then breaks the weld on the box, £300 sounds a lot

Dacone

Original Poster:

171 posts

204 months

Monday 18th June 2012
quotequote all
Yes I'm pretty certain it is, can't believe its happened this quick again.

It is expensive but I dont know of another place I can take my car for the welding. Annoying.

Plumber1 said:
Is it the bracket attached to the pipe and silencer on passenger side, if so it will keep braking, lost count how many times mine has been rewelded, if you don't get it done it then breaks the weld on the box, £300 sounds a lot

snuffy

13,201 posts

313 months

Monday 18th June 2012
quotequote all
I had mine welded twice before I replaced it. The dealer just did it as part of the service ( i.e. "oh, we just fixed that for you" when I collected it ).

£300 sounds a lot just to weld ta broken bracket. You'd be better off buying a nice new one.

Dacone

Original Poster:

171 posts

204 months

Monday 18th June 2012
quotequote all
AMG Merc said:
Can you get the car to The Ace Cafe on Wednesday evening whilst it is still light? Some of the lads may be able to help.
Possibly, will have to see how my day goes.

Where exactly is it?

Blu3R

2,380 posts

228 months

Monday 18th June 2012
quotequote all
Dacone said:
It is expensive but I dont know of another place I can take my car for the welding. Annoying.
How about any backstreet garage who own a welder? I paid £20 to have mine welded last year, been fine since.

Dacone

Original Poster:

171 posts

204 months

Monday 18th June 2012
quotequote all
Yes, that's true.

I just need to make sure it definitely is that bracket. Just thought a specialist will know what to look for.

I suppose it will be obvious. (hopefully)

Blu3R said:
How about any backstreet garage who own a welder? I paid £20 to have mine welded last year, been fine since.

Plumber1

630 posts

190 months

Monday 18th June 2012
quotequote all
It's a ten minute job to weld, but it will break again, there are a few fixes on the forum when the search works, just had mine welded, best fix is to get new exhaust, as I am trying to do smile

TuxMan

9,011 posts

267 months

Monday 18th June 2012
quotequote all
£300 to weld an exhaust !!! Bugger I'm going to buy a welder biggrin

Fett

207 posts

205 months

Monday 18th June 2012
quotequote all
MV fixed mine under warranty. Before that had it welded twice whilst driving around Europe. I just popped into a garage in Italy and they did it for free. Still went again though.

MV fixed a new bracket to the exhaust. Did they do this? Will try and get a pic tomorrow for you.

Edited by Fett on Monday 18th June 23:40

sjc

16,365 posts

299 months

Monday 18th June 2012
quotequote all
300 bloody quid to weld the bracket???Mine was 30 quid with an extra piece welded on for strength!!!!!!!!!!!

Dacone

Original Poster:

171 posts

204 months

Monday 18th June 2012
quotequote all
Plumber1 said:
It's a ten minute job to weld, but it will break again, there are a few fixes on the forum when the search works, just had mine welded, best fix is to get new exhaust, as I am trying to do smile
Yes I will be looking for a new exhaust soon. I know there are a few examples out there but haven't made my mind up yet.

Dacone

Original Poster:

171 posts

204 months

Monday 18th June 2012
quotequote all
Fett said:
MV fixed mine under warrenty. Before that had it welded twice whilst driving around Europe. I just popped into a garage in Italy and they did it for free. Still went again though.

MV fixed a new bracket to the exhaust. Did they do this? Will try and get a pic tomorrow for you.
No they just welded it.

You dont know the cost of a new bracket do you?

Picture would be great smile

Dacone

Original Poster:

171 posts

204 months

Monday 18th June 2012
quotequote all
sjc said:
300 bloody quid to weld the bracket???Mine was 30 quid with an extra piece welded on for strength!!!!!!!!!!!
Yes I know...

extra piece of welding for strength sounds the way forward.

Plumber1

630 posts

190 months

Tuesday 19th June 2012
quotequote all
this is the offending item, had mine welded yesterday lasts about 500 miles, it then cracks joint on back box, cant believe MV charged £300
one of the fixes was to make a new bracket and weld it on vertically, so it was standing up, not lying flat

Rob_W

1,070 posts

243 months

Tuesday 19th June 2012
quotequote all
Plumber1 said:
this is the offending item, had mine welded yesterday lasts about 500 miles, it then cracks joint on back box, cant believe MV charged £300
one of the fixes was to make a new bracket and weld it on vertically, so it was standing up, not lying flat
Did the welder have a Labrador by any chance?biggrin

F.C.

3,901 posts

237 months

Tuesday 19th June 2012
quotequote all
Typical of MV in my experience, they smell desperation and go in for the kill.
However they would have had to disconnect the ECU before welding it if it was mig. rolleyes

Gadgeroonie

5,362 posts

265 months

Tuesday 19th June 2012
quotequote all
the trick is to not re weld the old metal - but add new thicker material - I used the shaft of a bolt and it has been perfect ever since