MBE ecu re map who can do it ?

[coolchris]

Hi after having my cars turbos fully rebuilt my car was running low on boost 0.5 bar.Yesterday took it to Lee at devil developments for a rolling rd set up.Car is running a lot better now hitting 0.7 bar at 296bhp.
Lee said if i want more best option would be a good old fashioned remap.
Ideally i was hoping to get my car up to 320 maybe 330 max(done 320 on rollers a few years ago)I do have the open diff so would not want to temp fate.Now is it only Trevor jasper that can do the mbe ? or is there other outfits that can do it ? and what cost would I be looking at.

Cheers

Chris

[mgbond]

It depends if its locked or not. Do you have a free flowing exhaust. If not then 330 is achievable at about 0.9 bar.

[coolchris]

Hi Bondy not sure if its locked to be honest mate ?.Part of me thinks keep it as it is but i suppose we could always have more power.Can that place in guildford you took your car do the mbe ?

[coolchris]

just standard 2.5 exhaust

[mgbond]

coolchris said:

Hi Bondy not sure if its locked to be honest mate ?.Part of me thinks keep it as it is but i suppose we could always have more power.Can that place in guildford you took your car do the mbe ?

If its not locked they could, best ask the MBE boys how to find out

[TuxMan]

Trevor is the best man for the job !!

[coolchris]

what sort of cost are we talking about ?

[anonymous-user]

Do the Noble ecu's still spit out the lock code on the RS232 coms port post boot sequence??

[PaulM12]

coolchris said:

what sort of cost are we talking about ?

Last time I enquired it was roughly £500.


Paul

[GTO600]

Max_Torque said:

Do the Noble ecu's still spit out the lock code on the RS232 coms port post boot sequence??

Yes l think so, I've got a reader you can plug in & gives the code as you energise the Ecu.

[Gadgeroonie]

I normally charge approx £400 for remap and dyno time

Have done quite a few nobles over the years.

The mbe ecu is a bit dated but it does the job.

I would suggest you consider some new actuators plenty have gone soft/seized on cars i have seen