Discussion
Hi All,
I picked up my Noble at the weekend, Metallic Black 3R from near Peterborough.
Very pleased with it, well apart from the squealing RS29 brakes, which are doing my head in, they may be replaced with softer ones sooner rather than later.
Haven't been able to get access to Nobleparts yet though.
Matt
I picked up my Noble at the weekend, Metallic Black 3R from near Peterborough.
Very pleased with it, well apart from the squealing RS29 brakes, which are doing my head in, they may be replaced with softer ones sooner rather than later.
Haven't been able to get access to Nobleparts yet though.
Matt
StreetDragster said:
Do you think a removal, and application of copper slip or similar with help with the noise? (On the back of the pads obviously)
Don't think it's been laid up as such, but defintely low use, probably enough to shift any nesting rodents though
Thanks
Matt
Welcome! And yes application of copperslip to (rear!) of pads and to leading edges will silence the RS29s completely. Make sure you clean any dust and crud from the calipers before reinserting (air hose if you have access to one). If they still squeal after that , sell them to HollowpocketsDon't think it's been laid up as such, but defintely low use, probably enough to shift any nesting rodents though
Thanks
Matt

RobP said:
Welcome! And yes application of copperslip to (rear!) of pads and to leading edges will silence the RS29s completely. Make sure you clean any dust and crud from the calipers before reinserting (air hose if you have access to one). If they still squeal after that , sell them to Hollowpockets
Just been reprimanded by AdrianW for suggesting air-lines to clean off brake dust! Use brake cleaner instead, as the carcinogenic compounds used in the brake linings just drips harmlessly onto the floor. Oh and don't drink the brake cleaner, that won't be good for you either 

Gassing Station | Noble | Top of Page | What's New | My Stuff



