Tunnel cooling mod question

[Naso Grande]

Hi,

A question for those that have done the tunnel cooling mod to their cars. Is there anything behind the panel that will be damaged if I cut the two holes with the panel in situ?

I've got as far as removing the 2 Allen screws that block the access to the self tappers but 2 out of 4 of these are not budging so I'm now considering just cutting the holes with panel in place.

Thanks in advance,
Graeme

[Metalman]

I wouldn't want to do it as there are cables and hoses all around that area, getting the old crappy screws out is a right pita but is the safest way.

[mgbond]

I did it no problem

[dave sutton]

mgbond said:

I did it no problem

+1

[Naso Grande]

Thanks guys. I had to abandon the job until today due to being away at short notice.

I went ahead and cut the 2 holes with the panel in place using a 64mm holesaw without any problems.

Thanks again for all the advice.

Cheers,
Graeme