Discussion
I tried tugging at the edges of carpets but it all seemed pretty well glued down.
The thing that really p155e5 me off is that I stipulated before the car went into build that I wanted this extra wiring but they just forgot. It's in black and white on the order that was sent to Noble from MV.(Along with the request that the air filters/turbos/wastegates be in the original positions for extra Darth Vader effects, which was forgotten also) Martin.
The thing that really p155e5 me off is that I stipulated before the car went into build that I wanted this extra wiring but they just forgot. It's in black and white on the order that was sent to Noble from MV.(Along with the request that the air filters/turbos/wastegates be in the original positions for extra Darth Vader effects, which was forgotten also) Martin.
DanH said:Not really, as you have to get it "over" the chassis cross-members which the carpet won't really hide (if you can get it up, it's glued down in mine).
Couldn't you just run it under the carpet? The transmission tunnel is not a great environment as its pretty hot.
Alternative to running through the centre tunnel (not really a transmission tunnel as there isn't any transmission in it
) is to get some black box section conduit and run that front to back next to the tunnel. I think Danny or someone similar did that to put some sub-woffer in the rear.... Something like
www.maplin.co.uk/Module.aspx?ModuleNo=1305&TabID=1&source=15&WorldID=&doy=8m11
J
m12_nathan said:
It has transmission cables in it 
The factory did it for me for 30 mins labour or something trivial if that helps.
Thought it also had all the water pipes to the front radiator. I was under the impression that the reason my throttle cable was rerouted to the sill was because of the heat in there?
Gassing Station | Noble | Top of Page | What's New | My Stuff