Marcos Rear Light Problem

[Sandcrook]

The brake light has gone on one of my rear lights and dont know whether you have to remove perspex cover to get to bulb or cut pod off in clam . please can anybody help before I get the stanley knife out

[AMG Merc]

Well off you go to the Marcos forum then

Just kidding, someone here will be along to help...

[simonx50]

Sandcrook said:

The brake light has gone on one of my rear lights and dont know whether you have to remove perspex cover to get to bulb or cut pod off in clam . please can anybody help before I get the stanley knife out

Are they not accessible from inside the clam?

[951]

Do you mean the Afterburner rear lights?

Like these?



If so, you need to remove the back cover from inside the clam by cutting the silicone. On mine there was also 1 nut holding the cover on to a stud in the centre.

The bulb holders are then exposed and just twist off to change the bulbs.

[Sandcrook]

Thanks for the info Yes mine are just like yours in the picture. Do you just use normal black silicone to stick back

[951]

The first time I took one off the change a bulb I put it back with RTV black silicone.

After cutting it off again a bit later I got fed up with it and modified the backs to have an access panel that seals with a neoprene/rubber gasket.