wide band lambders

[2.5bluenob]

evening all!
I'm thinking about getting some wide band Lambders, but not sure how to choose. Are they ecu specific?
What are other people using?
Steve

[951]

They need a controller to make them work - you can't just replace the narrowband sensor with a wideband one, and the standard ecu will not take the wideband output.

However, most wideband controllers will have an additional output that mimicks the narrowband signal so you may be able to send that to the ecu instead.

[2.5bluenob]

951 said:

They need a controller to make them work - you can't just replace the narrowband sensor with a wideband one, and the standard ecu will not take the wideband output.

However, most wideband controllers will have an additional output that mimicks the narrowband signal so you may be able to send that to the ecu instead.

My ecu can work with wide band, so does that mean that i still need a controller?
Cheers
Steve

[GTO600]

Steve what Ecu are you using ?

[2.5bluenob]

Im using the OMEX 710 Kevin

[GTO600]

Omex 710 should be fine, suggest you try speaking to Darren at NMS or Steve at Track & Road as they both know the Omex well.
Kevin

[2.5bluenob]

GTO600 said:

Omex 710 should be fine, suggest you try speaking to Darren at NMS or Steve at Track & Road as they both know the Omex well.
Kevin

Ok Kevin, i'll speak to Steve as that's where i normally go for tuning.
Thanks for the help.
Steve

[mgbond]

2.5bluenob said:

Ok Kevin, i'll speak to Steve as that's where i normally go for tuning.
Thanks for the help.
Steve

My a ECU (not omex) needed a dual controller to run two WB's. Not sure about the Omex but it should not be too expensive.