Emergency Brake Pad Info Needed

[DerekFSU]

Greetings from across the pond. I'm at an event and heading to 3 more over the next 3 days. My pads are only good for one more event and I do not have replacements (this won't happen again). Does anyone have the exact model/brake pad number for the M400? Thanks!

[A.C.G.]

Anthony has listed the details on his site. I'd bookmark his page as it can be very useful.

www.gto3.com/components/brakes.htm#cdiscpads

When I last tried they where not available over the counter in the UK, AP Racing would only supply them via Noble.

Andrew.

[DerekFSU]

Thank you. I assume that brake setup is the same on the M400 as the M12?

[washy]

No idea if they're the same. What I can tell you for sure is my M400 runs a CP6600 with a pad depth of 55mm on the front. The rear pad has the same fit however, in my case, the pads have been cut back on the inner radius to a 46mm pad depth.

[chillidog]

DerekFSU said:

Thank you. I assume that brake setup is the same on the M400 as the M12?

My understanding is that the same AP Racing pad is used in both the 3R and the M400. However check with the factory - if you can't get them locally then next best bet is to ask if the factory in the UK to send you a set by Fedex/UPS next day service. Try emailing micknall via his profile.
--
Richard

[micknall]

At home at the moment, so I can't give you part numbers.

As standard, both 3R and M400 come with the same braking systems, though we do offer a harder pad, known as a DS2500 (an AP component) as an option.

Please e-mail me via my profile tomorrow for more info, but Ron and Dean at 1g should be able to do this anyway...

Simon Hucknall
Press Officer
Noble Automotive Ltd.

[lucozade]

Can anyone recommend the best place to buy the DS2500s?

[micknall]

Noble factory parts dept...

S

[lucozade]

micknall said:

Noble factory parts dept... S

Thought as much Simon