Paul's Silverstone Videos

[joust]

Available here

Or download them one at a time (they are rather large!)

Silverstone cabin cam MESC July 2006 snips.mpg - 29 x 30 - (56.54MB)
www.nobletv.co.uk/Videos/Owner%27s%20Videos/Paul/slides/Silverstone%20cabin%20cam%20July%202006%20endurance%20snippets.mpg

Silverstone cabin cam MESC July 2006 snips.mpg - 29 x 30 - (56.54MB)
www.nobletv.co.uk/Videos/Owner%27s%20Videos/Paul/slides/Silverstone%20cabin%20cam%20MESC%20July%202006%20snips.mpg

Silverstone clam cam July 2006 endurance snips.wmv - 29 x 30 - (61.57MB)
www.nobletv.co.uk/Videos/Owner%27s%20Videos/Paul/slides/Silverstone%20clam%20cam%20July%202006%20endurance%20snips.wmv

[kinetic]

Paul,

Great view of the Ultima blatantly cheating at the start of the midengined race!

That Golf has got some grunt! Can't believe the way he's pulling away down the straights!

I was thinking of doing some in car video myself for Pembrey. Are you using a 'bog standard' camcorder there or a proper in car kit? Any advice on the best way to go about it without spending a fortune?

Steve

[gadgeroonie]

some great vids there paul

vid 1 - the golf was pretty spritley ! - what engine has it got ?

Vid 2 - was that an exige at the end that came past ?

[kinetic]

it was me

Motorpsort elise with Honda civic type R + supercharger

[paulcundy]

gadgeroonie said:

some great vids there paul

vid 1 - the golf was pretty spritley ! - what engine has it got ??

No idea but i think its on slicks as well, it certainly is fast and thats part of the fun, they (especialy the Astons) pull out on the straights and the fun and excitement is getting back at them on the bendy bits.

gadgeroonie said:

Vid 2 - was that an exige at the end that came past ?

Yes, Steve came flying past. I don't know whether he found some speed from somewhere but we found that my IC fan was not working so this might be video evidence of the dreaded M12 heat soak. I did get the impression that I was pretty much keeping up until midway through teh race when the lead pack just disappeared.

Regards
PauL C

[paulcundy]

kinetic said:

Paul,


I was thinking of doing some in car video myself for Pembrey. Are you using a 'bog standard' camcorder there or a proper in car kit? Any advice on the best way to go about it without spending a fortune?

Steve

OK, the clam cam is this;

www.dogcamsport.co.uk/12vcam.htm

its a cheapy so quality not brilliant but I wanted to see what the view was like. Thats connected to a standard Sony handycam but the handycam must be able to accept analogue video input to be able to record from the camera.

The mount I use is the SC2, scroll down here;

www.b-hague.co.uk/Mounting%20Brackets.htm

I've modified mine to get rid of the handles, I use M6 studding connectors, these are like very long nuts, they are smaller than the supplied handles so it can be packed into tighter spaces and can be tightened with a spanner for absolute fixing.

the "cabin" videos are shot with a screw on wide angle lens adapter on a second standard handycam mounted as shown in this and the 5 following shots;

http://paulcundy.smugmug.com/gallery/

Rgeards
Paul C




PS here is a usefull summary site;
www.elises.co.uk/accessories/common/video/index.html

Edited by paulcundy on Wednesday 26th July 10:09

[kinetic]

Paul

Same thing happened to Mike Gardiners mega spec M400 aswell.
By the end of the race I had the legs on it and basically drove past him down the back straight! There is definately a significant heat soak issue with Nobles.

Also My M400 was really suffering on the test day before the race - felt gutless to be honest!

[ThatPhilBrettGuy]

paulcundy said:

....

Thats connected to a standard Sony handycam but the handycam must be able to accept digital video input to be able to record from the camera.

Analogue I think?

[paulcundy]

ThatPhilBrettGuy said:

paulcundy said:

....

Thats connected to a standard Sony handycam but the handycam must be able to accept digital video input to be able to record from the camera.

Analogue I think?

thanks, corrected, Analogue it is.

[kinetic]

O.K cheers Paul I will take a look.
I see Pembrey is cancelled!

[GTO-3R]

Awesome videos, what race was this? Is it a series or just a one off thing?

[paulcundy]

GTO-3R said:

Awesome videos, what race was this? Is it a series or just a one off thing?

www.midenginedsportscars.com/


MSA licence
Rollcage
Electric cutout
Fire extinguisher

Go racing!

[V6GTO]

paulcundy said:

GTO-3R said:

Awesome videos, what race was this? Is it a series or just a one off thing?

www.midenginedsportscars.com/


MSA licence
Rollcage
Electric cutout
Fire extinguisher

Go racing!

Paul,
Is the original rollcage acceptable or does one need to modify it?

Martin.

[chillidog]

V6GTO said:

..is the original rollcage acceptable or does one need to modify it?

Martin.

It needs mod'ing - talk to Graham at Plans, they can do a neat job.

- You tempted then?
--
Richard

[robp]

Richard -you got your car back yet?

[chillidog]

robp said:

Richard -you got your car back yet?

Not yet - went to see how it was progressing last week; it's going to be finished mid to end of August which is probably just as well as I've been rather busy at work!

Oh and trackdays would be roasting hot at the moment [I only said that to convince myself that I wasn't missing anything ... so that didn't work].

--
Richard

[V6GTO]

chillidog said:

V6GTO said:

..is the original rollcage acceptable or does one need to modify it?

Martin.

It needs mod'ing - talk to Graham at Plans, they can do a neat job.

- You tempted then?
--
Richard

Not any more

M.

[GTO-3R]

Wow looks fantastic, some great drivers including the top man himself mr Noble!!

Will definatley be keeping a watchfull eye on this, thanks very much