dump valve
Author
Discussion

gaz 7404

Original Poster:

326 posts

234 months

Thursday 13th December 2007
quotequote all
Hi all, Is there a special dump valve I need for the 3r or can i use a double piston one from forge? One for sale on ebay states it was designed for the noble?
Cheers - Gaz

RobP

2,097 posts

270 months

Thursday 13th December 2007
quotequote all
AFAIK you can use anyone you want

Ash M400

3,836 posts

270 months

Thursday 13th December 2007
quotequote all
gaz 7404 said:
Hi all, Is there a special dump valve I need for the 3r or can i use a double piston one from forge? One for sale on ebay states it was designed for the noble?
Cheers - Gaz
As far as I know, the forge ones are the best, most of us have them


MadMacMcMad

1,267 posts

283 months

Thursday 13th December 2007
quotequote all
What advantage is them in fitting the solid induction pipes over the standard hose ones?

Adrian W

15,493 posts

257 months

Thursday 13th December 2007
quotequote all
MadMacMcMad said:
What advantage is them in fitting the solid induction pipes over the standard hose ones?
It looks better

F.C.

3,901 posts

237 months

Thursday 13th December 2007
quotequote all
I fitted hard pipes because the inlet manifold pipe was collapsing when the throttle was blipped at idle so I figured this may be not good.
F.C.

V6 JIM

65 posts

230 months

Friday 14th December 2007
quotequote all
I also have a 3R, would you recommend putting a dump valve on the car. is it better for the car having one?

Cheers

Jim

peterguk

2,622 posts

246 months

Friday 14th December 2007
quotequote all
V6 JIM said:
I also have a 3R, would you recommend putting a dump valve on the car. is it better for the car having one?

Cheers

Jim
Definitly. A dump valve will prevent the turbines stalling during gear changes.

V6 JIM

65 posts

230 months

Friday 14th December 2007
quotequote all
Ok cheers

Where is the best place to get one and which one is best for the car?

Lakelord

1,756 posts

233 months

Friday 14th December 2007
quotequote all
Got mine from Noblemods http://www.noblemods.co.uk/index.html
They do either just the BOV or you can order hardpipe kits from them too. Very easy to fit but one thing to check is that you have a yellow spring installed. No biggie if it's a different colour, those kind chaps at Forge will have a yellow one with you double quick.
If you decide to install without the hardpipe kit, I'd recommend that you remove a circular section of the pipe with a tank-cutter and then bisect the pipe to install the BOV. You can then but the pipe up nice and tight and it minimises the twisting action under load.

Adrian W

15,493 posts

257 months

Friday 14th December 2007
quotequote all
This subject comes up over and over again, The best Dump valve is the ajdustable Turbosmart one in Demon Tweeks, they do an internal or external version. The external one is very loud. The hardpipe is a myth, the silicon pipe flexes for a split second and then doesnt move, but as i said earlier the metal one looks much better.