Pagid Pads (again)
Discussion
Just looking to get a set of Pagids on the car during servicing.
Kerridges are telling me that their supplier reckons the RS29s are not available for the rear. Their supplier has recommended the Pagid Blue RS5s.
Any views out there or experience with other than the RS19/29s please?
Thanks
Andrew
Kerridges are telling me that their supplier reckons the RS29s are not available for the rear. Their supplier has recommended the Pagid Blue RS5s.
Any views out there or experience with other than the RS19/29s please?
Thanks
Andrew
Air Support said:
Just looking to get a set of Pagids on the car during servicing.
Kerridges are telling me that their supplier reckons the RS29s are not available for the rear. Their supplier has recommended the Pagid Blue RS5s.
Any views out there or experience with other than the RS19/29s please?
Thanks
Andrew
I have Padgid RS29's front and rear on My M400 the only difference is material thicknessKerridges are telling me that their supplier reckons the RS29s are not available for the rear. Their supplier has recommended the Pagid Blue RS5s.
Any views out there or experience with other than the RS19/29s please?
Thanks
Andrew
I think the rears need a few mm less material than the fronts.
I find the RS29's really good, they have instant bite hot or cold or wet (I have grooved discs, might make a small difference) the only trade off is low speed squeal on cold discs.
Contact Plans Motor sports for info: 01483 548 545
F.C.
p-o-r-s-c-h-e said:
Also my problem: M12 GTO3 3.0 engine, I want Pagid front and rear, but only front is listed. Pls help! Juergen
JuergenI went back to Kerridges and quoted the part numbers from RobP on this thread - they are now telling me they can get the rears too and had in fact fitted some a few weeks ago onto another Noble. Said the part numbers start with ES though. Looks like they are still available - hopefully now on order for me.
Cheers
Andrew
Gassing Station | Noble | Top of Page | What's New | My Stuff


