Only 1 fan running?
Only 1 fan running?
Author
Discussion

mr-manners

Original Poster:

185 posts

214 months

Wednesday 19th November 2008
quotequote all
hi had my 3r for 2 weeks now and love it!

could anyone tell me are both fans supposed to kick in when it gets hot?
noticed only 1 spinning the other day after a fairly spirited run, temp gauge was on 90.

forgive my ignorance not mechanicly minded!



JLSELAN

405 posts

262 months

Wednesday 19th November 2008
quotequote all
Yes, both fans should run when turned on by ECU. Take a look at the wiring/connections, check for corrosion.

AMG Merc

11,955 posts

282 months

Thursday 20th November 2008
quotequote all
Also spin non-working fan by hand - does it spin or is it locked (ie: bearing seized)?

mr-manners

Original Poster:

185 posts

214 months

Thursday 20th November 2008
quotequote all
Thanks for your suggestions,wiring looks good and clean and the non working fan spins freely by hand.
can they be tested in any way,say by halfords or would i need to take it to a specialist auto electrician.

thanks again

S26VE P

2,174 posts

271 months

Thursday 20th November 2008
quotequote all
Without looking at mine (its on holiday for a few days while new garage roof fitted) can the wires be swapped to try on the other one?

daddysumo

2,545 posts

242 months

Thursday 20th November 2008
quotequote all
If you get the lead and the software you can switch the fans on and off and test all manner of things yourself.

Steve



JLSELAN

405 posts

262 months

Thursday 20th November 2008
quotequote all
mr-manners said:
Thanks for your suggestions,wiring looks good and clean and the non working fan spins freely by hand.
can they be tested in any way,say by halfords or would i need to take it to a specialist auto electrician.

thanks again
Should be very straightforward to test and diagnose--no specialist required, IMO.

mr-manners

Original Poster:

185 posts

214 months

Friday 21st November 2008
quotequote all
had a fiddle with the connections whilst the fan was running,seems it was just a bad connection,squeezed the blade type connector in to the block and the fan kicked in,joy!
looks like the blade thingy-m-jig is to long and isnt sitting snug.
anyway will keep my eye on it,thanks for all your advice once again.