the problem of heat !!!
Discussion
in a quest to make my Noble more efficient at managing its heat the first area is the exhaust system ,the wrapping had all fallen off (so much for full service history) and generally it was in a very poor state with both a loose turbo and a loose manifold ,this ment the hole lot had to come off and be sorted .
i have seen work done by pete at Camcoat and the Ultima lads spoke very highly of the ceramic coating that he does ,the Ultima factory uses his coating on there GTR 720 exhaust system so i decided the first step was to get it all coated .
the exhaust manifolds were to be coated inside and out ,down pipe's with cats outside only and the rest of the sysrem both inside and out ,this improves the flow of the gases and keeps heat inside the exhaust ,
After the big issue of heat soak with intercooler i decided to get the rear box done as well .
Having got all the system back yesterday i,m stunned by the quality and cannot wait to get it all refitted . simon
[pic]
[/pic]
[pic]
[/pic]
[pic]
[/pic]
[pic]
[/pic]
i have seen work done by pete at Camcoat and the Ultima lads spoke very highly of the ceramic coating that he does ,the Ultima factory uses his coating on there GTR 720 exhaust system so i decided the first step was to get it all coated .
the exhaust manifolds were to be coated inside and out ,down pipe's with cats outside only and the rest of the sysrem both inside and out ,this improves the flow of the gases and keeps heat inside the exhaust ,
After the big issue of heat soak with intercooler i decided to get the rear box done as well .
Having got all the system back yesterday i,m stunned by the quality and cannot wait to get it all refitted . simon
[pic]
[/pic][pic]
[/pic][pic]
[/pic][pic]
[/pic]Edited by TuxMan on Sunday 1st March 10:46
Nice job but that "Y" section is going to rob you of lots of power, while your at this stage you could look at a dual circuit exhaust (you will do this later)and a re-map and liberate the extra ponies without major mods.
there's plenty of people out there apart from Roush / Piper that can make a system for you, I had a quote from H&W for about £800 fitted.
F.C.
there's plenty of people out there apart from Roush / Piper that can make a system for you, I had a quote from H&W for about £800 fitted.
F.C.
TuxMan said:
Yep ,be a nice further mod ,but at the moment i just want the car to be reliable and give the power its supposed to ....and look good !!! you are not wrong Graham cars a very similar only one has a better build quality 

Hi,

Edited by TuxMan on Sunday 1st March 17:09
Any chance you could PM me the cost for this and contact details. I have a 2.5 and I have a 3ltr exhaust sitting here ready to go in soon. Wouldn't mind knowing what you have done to strengthen the manifolds?
Thanks
Bondy
Gassing Station | Noble | Top of Page | What's New | My Stuff







