Wheel Centres Where from.

[MadMacMcMad]

Gents I have the original M12/03 wheels and the centre nuts are looking their age.
Any ideas where I can get some new ones from?

Cheers

[mgbond]

You can't get them any more. I called tsw and they had an odd spares bin and they gave me a set.

Your best bet if this doesn't work is to get them re- annodised

Bondy

[Custard_Cream]

There are no more left anywhere. TSW don't have any and the factory got rid of the last one in the summer.

[TuxMan]

are we talking about the red large nut in the center of the wheel ?? if so just check with the factory as last week they supplied me with a plastic TSW spanner and he checked the size was right on a nut he had in stock !!
to be honest i,ve had mine re-anodised and they came up ok !!

[pic][/pic]

[Custard_Cream]

I was talking about the plastic centre. The nuts they still have at TSW. I need to get a spanner for mine.

[mgbond]

TSW do not sell the nut anymore (unless they have old stock).

I think there were about 3 of us trying to get some different colours and we managed to raid there scrap bin for slightly marked ones.

Bondy

[art411y]

not quite sure what i did with the plastic ones as i made some ali ones.will have a look around at the weekend to see if ive kept them

[MadMacMcMad]

I just bought some TSW ones and they are a much courser thread. So they don't fit!

Taking them back today.

[OllyV8]

Been after a nut and 2 plastic middles for ages now was loking at getting some made from carbon or fibreglass but for a small run the cost was a bit high. My next thig was to find a metal spinning place and get some made. Art if you happen to find your plastic ones could i buy 2 from you!!??
Olly

[mr.man]

If there is sufficient demand for the centre anodised nut that holds the plastic cover in place then I might be prepared to manufacture a batch. Over to you guys.

[art411y]

OllyV8 said:

Been after a nut and 2 plastic middles for ages now was loking at getting some made from carbon or fibreglass but for a small run the cost was a bit high. My next thig was to find a metal spinning place and get some made. Art if you happen to find your plastic ones could i buy 2 from you!!??
Olly

if i can find them you can have em for nowt

[OllyV8]

That would be awesome thank you

Olly