Big thanks to Wayne at Pro Alloy.....

[david.mt]

I recently bought a number of shiny bits for my nob including the hard pipe kit.

However I have an aftermarket intercooler fitted which has side exits so the straight rear turbo boost pipe supplied in the kit was a little short and I also have a Forge BOV but there was no adapter on the supplied intercooler boost pipe - I thought the BOV was standard . Not a problem - sent them back to Pro Alloy and Wayne arrange for the Forge boss to be added and a direct replacement for the rear turbo boost pipe to be fabricated the same day and sent back out.

First rate service ...thanks.

[TIGERSIX]

They are top men both Wayne and Alex and all their crew they also made me loads of bits formy 3R you should see the rads they should be mounted on top of the front clam for the world to see

[stewey]

TIGERSIX said:

They are top men both Wayne and Alex and all their crew they also made me loads of bits formy 3R you should see the rads they should be mounted on top of the front clam for the world to see

Any pics of your 'shiny bits'?

[david.mt]

stewey said:

TIGERSIX said:

They are top men both Wayne and Alex and all their crew they also made me loads of bits formy 3R you should see the rads they should be mounted on top of the front clam for the world to see

Any pics of your 'shiny bits'?

Pimp my nob...;)

[Duke Thrust]

Ooooo! Nice!

[TIGERSIX]

david.mt said:

stewey said:

TIGERSIX said:

They are top men both Wayne and Alex and all their crew they also made me loads of bits formy 3R you should see the rads they should be mounted on top of the front clam for the world to see

Any pics of your 'shiny bits'?

Pimp my nob...;)

YOU DO KNOW THAT YOU CAN GET BANNED FOR SHOWING PORN ON PH DON'T YOU BUT ITS ALL IN THE BEST POSSIBLE TASTE EH PHIL

[TIGERSIX]

stewey said:

TIGERSIX said:

They are top men both Wayne and Alex and all their crew they also made me loads of bits formy 3R you should see the rads they should be mounted on top of the front clam for the world to see

Any pics of your 'shiny bits'?

Mine is in so many bits even Airfix would struggle to do a set of instructions for its assembly might post some pics of it with the the floor out, engine out,suspension off,rad out ect ect,but I do have loads of new shiny bit to put it back together with when the g/box is ready so it will make life easier