Rear LED Lights
Discussion
Sorry, but that question has bounced around on this forum so many times. I am hoping to make a trip to Adrenaline Motorsports open day soon and ask the question "if I had 20+ people wanting to buy rear lights, would you be interested in making them, got to be worth a try. Here is there web site, http://www.adrenalinemotorsport.co.uk/ you can see they are using "Ultima" style rear lights, but with a mould etc, etc who knows. I wil let you know. Would aim a price to buy as group of around £400 a pair, if they where a straight swap there would be no "adapting" of the clam so cheaper fit. What was the price of noblemods lights, what do we think a fair price would be????
This site maybe of interest: http://www.s-v-c.co.uk/lights_rear.html
You would still need to make up some lamp base mounting arrangements/connectors/vacuum formed clear covers. The latter would not be simple either as they too would need some form of mounting - other than the crude sealant arrangement used for the `afterburners` as fitted to my car. The alternative would be a vac formed or grp moulding to house the lamps similar to the Noble Mods design.
You would still need to make up some lamp base mounting arrangements/connectors/vacuum formed clear covers. The latter would not be simple either as they too would need some form of mounting - other than the crude sealant arrangement used for the `afterburners` as fitted to my car. The alternative would be a vac formed or grp moulding to house the lamps similar to the Noble Mods design.
Good work Bob, that looks like the same light units that they are using. This small car manufacture uses a GPR body system so was hoping they could take the light fitting and produce the mould. As far as clear cover I was going to leave it open(as the Adrenalines car and the latest Ultima), Will see what Neil thinks and report back.
BobE said:
This site maybe of interest: http://www.s-v-c.co.uk/lights_rear.html
You would still need to make up some lamp base mounting arrangements/connectors/vacuum formed clear covers. The latter would not be simple either as they too would need some form of mounting - other than the crude sealant arrangement used for the `afterburners` as fitted to my car. The alternative would be a vac formed or grp moulding to house the lamps similar to the Noble Mods design.
Be careful though http://www.s-v-c.co.uk/prod/led-resistor.html the proper cost of those resisters is £0.09 eachYou would still need to make up some lamp base mounting arrangements/connectors/vacuum formed clear covers. The latter would not be simple either as they too would need some form of mounting - other than the crude sealant arrangement used for the `afterburners` as fitted to my car. The alternative would be a vac formed or grp moulding to house the lamps similar to the Noble Mods design.
Gassing Station | Noble | Top of Page | What's New | My Stuff