Oil pressure switch location

[Ady_ftta]

Hi guys,

I am slowly making my way through the little niggles on the car, however as much as I fix one thing I discover another!

I am now looking at the oil pressure warning light on the centre consul not working.

Having seen how difficult it will be to renmove the centre consul, I thought I would check the connection to switch on the engine first to see if the wiring has corroded.

Can anyone tell me where the oil pressure switch is located on the block of a 2.5? I read in the build manual that it was on the right hand side of the block (i.e. nearest the IC - but I cant find it).

As always, any help would be most welcome.

Ady

[Adrian W]

on the 3 litre it is just under the alternator on the block, usually the switch is ok but the wire has been burnt through by the exhaust.