price of rear clam
price of rear clam
Author
Discussion

2.5bluenob

Original Poster:

1,620 posts

205 months

Thursday 11th March 2010
quotequote all
has any one on here forgotten to do the clips up on their rear clam lately? I overheard a conversation at mole valley recently and thought a heard £14,000 mentiond to replaceredface

Edited by 2.5bluenob on Saturday 13th March 15:24

worty

2,202 posts

254 months

Thursday 11th March 2010
quotequote all
There is a front one on fleabay for £1700, cant think the rear one would be nearly 8 times more expensive even with paint and bits. Certainly there unlikely to get cheaper unless someone can get hold of a mould.

worty

Adrian W

15,467 posts

257 months

Friday 12th March 2010
quotequote all
worty said:
There is a front one on fleabay for £1700, cant think the rear one would be nearly 8 times more expensive even with paint and bits. Certainly there unlikely to get cheaper unless someone can get hold of a mould.

worty
Noble have had new moulds made and now have all the M12 fibreglass bits manufactured in the UK, A bare front clam is £1500+ vat

2.5bluenob

Original Poster:

1,620 posts

205 months

Friday 12th March 2010
quotequote all
But add to the price all the grills and spoiler,clam clips,little foam packers to stop it rubbing against the car. I supose their are a lot of little bits that need to be got brought seperatly. And not sure how much prep work would need to be done to get the clam ready to paint.

andygtt

8,345 posts

293 months

Friday 12th March 2010
quotequote all
Spolier will be around 1.5k and all associate bits wouldn't be more than 0.5k... I'd expct the rear clam to cost more than from so say 2k and painting 1k.
So 5-6k seems realisic unless other things were damaged.

sjc

16,380 posts

299 months

Friday 12th March 2010
quotequote all
Adrian W said:
worty said:
There is a front one on fleabay for £1700, cant think the rear one would be nearly 8 times more expensive even with paint and bits. Certainly there unlikely to get cheaper unless someone can get hold of a mould.

worty
Noble have had new moulds made and now have all the M12 fibreglass bits manufactured in the UK, A bare front clam is £1500+ vat
That good news, are they starting to show a renewed interest(profit potential)in us?

hoyin

1,233 posts

266 months

Friday 12th March 2010
quotequote all
http://www.petersmithsportscars.com/

Go to the online shop:

rear clam: £1,980

Front £1,583

I don't suppose any of the Rossion body work would fit a 3R?

AMG Merc

11,955 posts

282 months

Friday 12th March 2010
quotequote all
andygtt said:
Spolier will be around 1.5k
Seriously? I had no idea it was so expensive yikes

FUNKSTER UK

765 posts

231 months

Friday 12th March 2010
quotequote all
AMG Merc said:
andygtt said:
Spolier will be around 1.5k
Seriously? I had no idea it was so expensive yikes
I much prefer the one on Deano's car