Dyno tuning?? where to go?

[leemullan16]

i have just had a new back section stainless exhaust made up and i think the next step is a remap or a general tune up. im not sure who to use or where to go i live near heathrow way and my noble is the oldskool 2.5 gto have any of you got any ideas off cost and where to go etc???

thankyou

[wessexrfc]

YellowShed is your man http://www.pistonheads.com/gassing/profile.asp?mem... lucky for you they arn't to far away. Have you upgraded your fuel pump/wiring and intercooler to help with the extra power etc??

[leemullan16]

i brought my car a year ago from mole valley and its the second one ever built. i have all the factory photos and a good one of lee standing next to it in the factory..all the 90 elbows are all samco and all induction/turbo hose are stainless so im thinking its all done to a high level already i am just interested to see what bhp its kicking out and if possible squeeze a tiny bit more out of it. thanks for the help

[jamescmr2]

Mike Tuckwood at Area52Autosport near Nottingham can help. Genuine enthusiast and was the place the dyno day was held a couple of weeks ago.

He better be good anyway as he has my car at the moment....

cheers

James

[Gadgeroonie]

what ecu do you have fitted ?

[worty]

leemullan16 said:

its the second one ever built.

What build number is that? Its the last couple of digits on the identification plate which is situate on the chasis rail just near the header tank.

worty

[leemullan16]

i will look tonight on the last few digits...going out for a blast first tho!! not sure on the ecu i dont even know how to get to it. when i brought the car it had a £500 bill for an ecu upgrade?

[2.5bluenob]

leemullan16 said:

i will look tonight on the last few digits...going out for a blast first tho!! not sure on the ecu i dont even know how to get to it. when i brought the car it had a £500 bill for an ecu upgrade?

Thats cheap mine was over £3000

[Adrian W]

Contact Yellowshead