Discussion
I did post before about my internal fans that would work for a bit and then after a while would stop. It would last longer on the slow speed than on the fast speed.
They don't work at all anymore and I want to get it fixed. My garage have suggested that its the resistor pack.
I have a few questions:
Do all 3 speeds go through the resistor as in the Mondeo it didn't so normally setting 4 would work and the others wouldn't (indicating its the resistor).
Other than replacing this with the same part, is there a better part to get?
Someone did mention that the wires to the fan motor may be breaking down and best to relplace them. I don't want to think its the motor at this point as I can't understand why one of them would break down otherwise it would be happening in loads of other cars?
Cheers
Bondy
They don't work at all anymore and I want to get it fixed. My garage have suggested that its the resistor pack.
I have a few questions:
Do all 3 speeds go through the resistor as in the Mondeo it didn't so normally setting 4 would work and the others wouldn't (indicating its the resistor).
Other than replacing this with the same part, is there a better part to get?
Someone did mention that the wires to the fan motor may be breaking down and best to relplace them. I don't want to think its the motor at this point as I can't understand why one of them would break down otherwise it would be happening in loads of other cars?
Cheers
Bondy
The original resistor pack IS a joke, you would be better of fitting an escort Mk 4/5 fan unit with its "proper" resistor pack, the fit is identical after having cut off a couple of plastic mounting lugs and drilling two holes, about ten miutes work. Which is more than I can say for the actual strip out of the fan box 
I did mine in about four hours in and out but it is a b
ks of a job.
F.C.

I did mine in about four hours in and out but it is a b
ks of a job.F.C.
F.C. said:
The original resistor pack IS a joke, you would be better of fitting an escort Mk 4/5 fan unit with its "proper" resistor pack, the fit is identical after having cut off a couple of plastic mounting lugs and drilling two holes, about ten miutes work. Which is more than I can say for the actual strip out of the fan box 
I did mine in about four hours in and out but it is a b
ks of a job.
F.C.
Tony, Is it the Mk 4 or 5 fan unit. Do you have anymore details?
I did mine in about four hours in and out but it is a b
ks of a job.F.C.
Thanks
Bondy
Gassing Station | Noble | Top of Page | What's New | My Stuff




