exhaust bracket

[Plumber1]

Hi all.
how do you stop the bracket on the exhaust from breaking. Fed up with having it welded. Is there a mod for this or can you just remove it?

[5paulmv]

try using jubilee clips over the rubbers that hold the back box on as when they get warm they expand and put a point load on to remaining bracket it may work its a tvr trick done it to my nobe soon as i got it

[daddysumo]

Weld a stronger piggy back strap parallel the existing one.

[verba1]

Plumber1 said:

Hi all.
how do you stop the bracket on the exhaust from breaking. Fed up with having it welded. Is there a mod for this or can you just remove it?

spoke to one guy he actually took the heavy back box off and ran it without . it must be quite loud like that ?

[JLSELAN]

Here's a fix from some time ago that worked very well:
http://www.nobleforums.com/showthread.php?t=1362&a...

(see post #2)

Heavier steel bracket material turned to take better advantage of geometric stiffness.

[RobP]

Plumber1 said:

Hi all.
how do you stop the bracket on the exhaust from breaking. Fed up with having it welded. Is there a mod for this or can you just remove it?

Buy a proper exhaust. You won't regret it.

[andygtt]

strangely mine never broke off in all the miles... is it possible its fitted under a little stress or an engine mount is worn giving excess movement?
I know its a common issue but some never break so has to be a reason?

[sjc]

daddysumo said:

Weld a stronger piggy back strap parallel the existing one.

Yep.Not had it go since.