noble power steering pump ??

[yellowvette]

Hi everybody !! my power steering pump is dead (one liter of fluids lost in 50km)
so I have to replce it but It's a noble special parts or it's the same than the mondeo 2.5 V6 ??
my noble is a 2003 gto-3
thanks

[mr2turbo300]

Are you sure the hose that runs front to back is not split, that is what happened to mine.

Edited by mr2turbo300 on Wednesday 9th March 14:23

[yellowvette]

I don't thinks we remove all the system and the hose is good
the fluid flow from the bottom of the pulley
we open the pump and check it and the sill is damaged ( there is a little deformation inside the pump)

[yellowvette]

hi, someone can help me ??

[RobP]

Hi Garand, this is not a common problem which maybe why there are so few responses. It might be quicker to phone Noble in UK and get an answer from them. Speak to Simon in Spare Parts - he's usually very helpful.

[yellowvette]

ok thanks and I've already mailed petersmithsportscars and je tell me 350£ for the pump
in france the pump for the 2L5 V6 looks like the same is at 150€

[daddysumo]

It's probably easier to take the pump off and go to your local Ford dealer and check it against their part database.

[yellowvette]

daddysumo said:

It's probably easier to take the pump off and go to your local Ford dealer and check it against their part database.

yes but my local ford dealer is not good, I must wait 3 weeks and with lots of difficulties to have an ignition coil !!

[joust]

I don't think the part number has ever been posted on here.

This is the only thread about it that's been on here.

http://www.pistonheads.com/gassing/topic.asp?h=22&...

You could try emailing V6 JIM to see if he found the part number. There is a picture of the pump on the build manual (register on www.nobleparts.co.uk with your chassis number to get access), but it's not exactly clear.
J

[yellowvette]

I put back all the system and I don't see any fluid loss but I don't have steering assist!!
the steering wheel is so hard !!

[yellowvette]

and my steering assist bottle seems do be damaged and maybe it is the reason of the fluid loss

[key750]

If someone needs:

Page 12
http://para.noid.org/~lj/Noble/NobleInfo.pdf

[XLRONYX]

key750 said:

If someone needs:

Page 12
http://para.noid.org/~lj/Noble/NobleInfo.pdf

Well, there's a surprise. That's my web site. Para.noid is hosted by a friend, and lj is short for Little Jeff because the other Jeff in our group of car crazies is 6 foot something and over 200 pounds, and I'm not. If anybody downloaded that pdf, do so again because I just replaced the pdf file with a newer version with a few more part numbers.

When I started that collection of noble information odds and ends (bits and bobs? ), I did not know about this site or nobleparts. Since I had it going, I've continued to add information even now that I know about the wiki.

If you have time to kill, http://para.noid.org/~lj has a bunch of information, pictures, and videos about the Chevy Camaro I fooled with for several years.

Jeff

[yellowvette]

Hi, I give you some news finally it's not the steering pump
I have a steering oil leak on the little oil intercooler on the left front of the car
the intercooler is dead !!

[andygtt]

yellowvette said:

Hi, I give you some news finally it's not the steering pump
I have a steering oil leak on the little oil intercooler on the left front of the car
the intercooler is dead !!

new mocal one will be around £60 plus fitting.

[funkybmx1]

While u change that cooler one them pipes perish really bad. Goes to the rack. Prob 3ft long. About £20 from a hydraulic place. It's worth checking. Only that be due soon after as well as it getting moved about now

[yellowvette]

ok and do you know where I can find the mocal oil cooler or a similar one ??

[yellowvette]

I find a few new oil cooler but I don't understand what is 8 JIC, 10 JIC, 12 JIC....???
what type of JIC for the noble ??

[yellowvette]

yellowvette said:

I find a few new oil cooler but I don't understand what is 8 JIC, 10 JIC, 12 JIC....???
what type of JIC for the noble ??

hi somedy can help for the JIC choice ???

[GTO600]

Are you sure it's the oil cooler leaking ? It's usually the pipe comnnections leak where the pipe is crimped to the elbow fitting.