PDC & Offset

[snuffy]

Does anyone know what the PDC and offset for the Nob is ?

[joust]

It's in this old thread (but no idea if it is right)

http://www.pistonheads.com/gassing/topic.asp?h=0&a...

J

[snuffy]

Joust, Thanks for that. I'll have a go at measuring them as well and see if I agree.

The thing is, all the previous wheel caper and carry on has definitely made conclude that the standard GTO3 wheels ( i.e. mine ) are a bit crap and dated so I want to see what else is available; there must be something that will fit.

[joust]

There is 3 or four on that thread that do, but from memory all are in the 2k+ range for a set.

[snuffy]

joust said:

There is 3 or four on that thread that do, but from memory all are in the 2k+ range for a set.

There are some good one on there, but at the price it's more than I want to spend. Up to about £1k would be okay.

[SimonJW]

Have you seen the thread on the next page ref Rota Grid drift wheels?

Si

[snuffy]

SimonJW said:

Have you seen the thread on the next page ref Rota Grid drift wheels?

Si

Yes indeedy I have. That's what's prompted me to ask the question/look at options.

[Blu3R]

PCD is 4x108 same as old Ford & Peugeot. Offset is et23 front & et35 rear.
As joust says, nothing is available for less than about 2 grand, hence why I've twice tried to find an alternative.

[snuffy]

Blu3R said:

PCD is 4x108 same as old Ford & Peugeot. Offset is et23 front & et35 rear.
As joust says, nothing is available for less than about 2 grand, hence why I've twice tried to find an alternative.

Thanks matey. I know you did your best on the Grid ones.

[Blu3R]

snuffy said:

Thanks matey. I know you did your best on the Grid ones.

Hey no problem, everyone is different which makes the world what it is
I thought I might have found 10 likeminded though!!