Titanium exhaust system

[Adrian W]

I've been talking to Leon at Alunox recently, he is thinking about producing a full titanium system for the Noble, he estimates that it will weigh about a 30% of the Roush/Piper system, He is trying to gauge what sort of interest there would be, he makes Titanium systems for other cars. It will be repackable, It is difficult for him to price as he has no estimate of demand and the raw materials are expensive, Is anyone interested?

I have said I will have one.

[daddysumo]

Adrian W said:

I've been talking to Leon at Alunox recently, he is thinking about producing a full titanium system for the Noble, he estimates that it will weigh about a 30% of the Roush/Piper system, He is trying to gauge what sort of interest there would be, he makes Titanium systems for other cars. It will be repackable, It is difficult for him to price as he has no estimate of demand and the raw materials are expensive, Is anyone interested?

I have said I will have one.

Would be interested dependent on noise level and price.

[ecostuff]

ditto re noise and price....would be for a m400.

[hollowpockets]

Again depending on price/noise i'd be interested in one for my M400

[GTO600]

I've just changed my Piper/Roush silencer boxes, really surprised how heavy they are !
If these are going to be re-packable then i'm interested.

[funkybmx1]

I'll be interested may be. Dependin noise levels as mine is only 97db.

[elenitro]

I've been thinking about upgrading my standard exhaust so might be interested, again depending on price and noise!

[les5709]

Same i would be interested for my 2.5 pending price

[andygtt]

on my exhaust its the pipework that is the weight as the silencer is relatively light (mine uses titanium perforation inside and there is only 1 silencer)... id be interested in how much the tube is compared to stainless as i must admit i thought it was prohibitable expensive.

[Adrian W]

andygtt said:

on my exhaust its the pipework that is the weight as the silencer is relatively light (mine uses titanium perforation inside and there is only 1 silencer)... id be interested in how much the tube is compared to stainless as i must admit i thought it was prohibitable expensive.

That is why he needs to estimate his usage, then he can reach an agreement with his supplier

[andygtt]

sounds promising I could just replace the heavy pipes

must admit the weight saving sounds tempting

[sundance002]

daddysumo said:

Would be interested dependent on noise level and price.

+1